WACKER NEUSON PSR1 500TA
LOW-LEVEL RESIDUE SUBMERSIBLE PUMP
POWERFUL • LOW-LEVEL PUMPING • COMPACT • BUILT FOR THE JOB SITE
The Wacker Neuson PSR1 500TA is a high-performance submersible pump designed specifically for low-level water removal, making it an excellent choice for contractors who need to remove water from areas such as flat floors, basements, trenches, excavations and other difficult-to-drain locations.
The PSR1 can start pumping at very low water levels when primed through the discharge port, giving operators an effective solution when leaving a large amount of residual water behind isn't an option.
KEY SPECS
Motor: 0.75 kW / 750 W
Maximum flow: 310 L/min
Maximum delivery head: 18 m
Maximum solids: 6 mm
Operating weight: 13.8 kg
Dimensions: 192 × 223 × 341 mm
Nominal speed: 3,300 rpm
Power cable: 15 m
Top discharge: Designed for continuous operation and motor cooling
Low-level pumping: Designed to remove water down to low residual levels
WHY CHOOSE THE PSR1 500TA?
EXCELLENT LOW-LEVEL PERFORMANCE
The PSR1 is designed for applications where you need to remove water down to a very low level. This makes it particularly useful on flat surfaces and other areas where conventional pumps may leave unwanted residual water.
310 LITRES PER MINUTE
With a maximum flow rate of 310 L/min, the PSR1 provides strong water-removal performance for construction and general dewatering applications.
18 METRE DELIVERY HEAD
The pump offers a maximum delivery head of 18 metres, providing flexibility when water needs to be discharged to a higher elevation or through longer discharge runs.
BUILT FOR DEMANDING JOB SITES
Wacker Neuson incorporates built-in thermal protection, a durable mechanical seal system and a heavy-duty power cord designed for construction-site conditions.
COMPACT & PORTABLE
At approximately 13.8 kg, the PSR1 is easy to transport and position where it's needed, while still delivering the performance expected from a professional-grade pump.
IDEAL APPLICATIONS
? Construction site dewatering
? Flat concrete floors
? Basements
? Trenches and excavations
? Pits and sumps
? Civil construction
? Flooded areas
? Drainage applications
? General low-level water removal
THE BOTTOM LINE
If you need to remove water quickly and get down to a very low residual water level, the Wacker Neuson PSR1 500TA is a highly practical professional pumping solution.
Wacker Neuson PSR1 500TA – powerful low-level dewatering when every last bit of water matters.