Quantum Blast 800CFM Pneumatic Air Aftercooler | Moisture Separator

QUANTUM BLAST QB-800CFM – Industrial Pneumatic Air Aftercooler with Moisture Separator

800 CFM AIR CAPACITY | COPPER-TUBE HEAT EXCHANGER | PNEUMATIC OPERATION | COMPRESSED AIR MOISTURE REMOVAL

PRICE: $6,950 + GST & FREIGHT

Improve the quality of your compressed air with the Quantum Blast QB-800CFM Industrial Air Aftercooler, a heavy-duty air-cooled aftercooling system engineered for high-volume compressed air applications.

Featuring a high-performance copper-tube heat exchanger, pneumatically driven cooling fan and integrated moisture separator, the QB-800CFM is designed to reduce compressed air temperature and remove condensed moisture before the air reaches downstream equipment.

With a rated airflow capacity of 800 CFM, this industrial aftercooler is ideal for abrasive blasting contractors, industrial maintenance businesses, heavy-duty diesel compressors and demanding pneumatic applications.

NO EXTERNAL ELECTRICAL POWER REQUIRED – AIR-DRIVEN COOLING SYSTEM.

WHY CHOOSE THE QUANTUM BLAST QB-800CFM AFTERCOOLER?

1. HIGH-CAPACITY 800 CFM AIRFLOW

Designed for industrial applications requiring high volumes of compressed air, the QB-800CFM supports compressor systems with airflow requirements up to 800 CFM, subject to operating conditions.

Ideal for:

- Industrial dry abrasive blasting
- Wet abrasive and dustless blasting
- High-capacity diesel air compressors
- Heavy industrial surface preparation
- Industrial maintenance and shutdowns
- Construction and infrastructure projects
- Pneumatic equipment and compressed air systems

The 800 CFM capacity makes it a practical air treatment solution for contractors operating larger compressor systems.

2. EFFECTIVE MOISTURE REMOVAL – APPROXIMATELY 80–90%

Moisture in compressed air can cause significant problems in industrial equipment, particularly abrasive blasting systems.

The Quantum Blast aftercooler uses a high-performance heat exchanger to cool hot compressed air, allowing water vapour to condense.

An integrated moisture separator then removes a substantial proportion of the condensed water from the air stream.

Key benefits:

- Approximately 80–90% removal of condensed moisture under suitable operating conditions
- Helps reduce water entering abrasive blast pots
- Minimises moisture-related abrasive clogging
- Supports consistent abrasive flow
- Helps protect downstream pneumatic equipment
- Reduces moisture-related maintenance issues

Actual moisture removal performance depends on inlet temperature, ambient conditions, airflow, pressure and separator performance.

3. COPPER-TUBE HEAT EXCHANGER – EFFICIENT AIR COOLING

The QB-800CFM features an industrial heat exchanger incorporating copper tubes for efficient heat transfer.

As hot compressed air passes through the heat exchanger, forced airflow removes heat, lowering the compressed air temperature.

Benefits include:

- Efficient heat transfer
- Reduced compressed air discharge temperature
- Improved condensation of water vapour
- Robust industrial cooling performance
- Suitable for high-volume compressed air applications

4. PNEUMATICALLY DRIVEN – NO EXTERNAL ELECTRICITY REQUIRED

Unlike electrically driven cooling systems, the QB-800CFM uses a pneumatic air motor to operate the cooling fan.

This makes it particularly useful for remote industrial worksites, mobile blasting contractors and compressor installations where electrical power is unavailable or inconvenient.

Key advantages:

- Air-driven cooling fan
- No external electrical supply required
- Suitable for remote job sites
- Practical for mobile compressor operations
- Simple integration into suitable compressed air systems

The pneumatic motor consumes compressed air during operation and must be supplied with appropriately regulated air.

5. INTEGRATED MOISTURE SEPARATOR

The QB-800CFM incorporates a moisture separation system to help remove condensed water following the cooling process.

Reducing liquid moisture before it enters downstream equipment can improve blasting reliability and reduce maintenance requirements.

Especially beneficial for:

- Abrasive blast pots
- Blast hose and abrasive metering systems
- Pneumatic machinery
- Industrial compressed air equipment
- Air tools and suitable industrial processes

6. BUILT FOR INDUSTRIAL APPLICATIONS

Designed for demanding operating environments, the Quantum Blast QB-800CFM provides a practical solution for contractors and businesses requiring improved compressed air moisture management.

Its air-cooled, pneumatically driven configuration is particularly well suited to mobile and high-capacity industrial compressor applications.

QB-800CFM TECHNICAL SPECIFICATIONS

- Brand: Quantum Blast
- Model: QB-800CFM
- Equipment Type: Industrial Compressed Air Aftercooler
- Rated Airflow Capacity: 800 CFM
- Equivalent Airflow: Approximately 22,653 LPM
- Heat Exchanger: Copper-Tube Air-Cooled System
- Cooling Fan Drive: Pneumatic Air Motor
- Air Motor Speed Range: 300–3000 RPM
- Design Pressure: 174 PSI (12 Bar)
- Maximum Inlet Air Temperature: 120°C
- Nominal Ambient Temperature: 25°C
- Maximum Ambient Temperature: 45°C
- Moisture Separation: Integrated
- Typical Condensed Moisture Removal: Approximately 80–90% under suitable conditions
- External Electrical Power: Not Required

Working pressure and pneumatic motor supply pressure must be confirmed against the equipment manufacturer's specifications.

KEY FEATURES

- High-capacity 800 CFM aftercooler
- Copper-tube industrial heat exchanger
- Pneumatically driven cooling fan
- Integrated moisture separator
- Reduces compressed air temperature
- Helps remove condensed moisture
- No external electrical power requirement
- Suitable for high-capacity diesel compressors
- Supports consistent abrasive blasting performance
- Designed for demanding industrial applications

IDEAL FOR ABRASIVE BLASTING CONTRACTORS

DRY ABRASIVE BLASTING

Moisture in compressed air can cause garnet and other abrasive media to become damp, leading to blockages, inconsistent abrasive flow and unnecessary downtime.

The Quantum Blast QB-800CFM helps reduce the amount of liquid water entering the blast pot and associated equipment.

WET ABRASIVE & DUSTLESS BLASTING

Suitable for compressed air preparation in wet abrasive blasting systems, including compatible Quantum Blast RapidBlast™ equipment.

Improved compressed air moisture management can support reliable pneumatic operation.

INDUSTRIAL SURFACE PREPARATION

Suitable for contractors working on structural steel, industrial machinery, tanks, pipelines and infrastructure maintenance projects.

MINING & HEAVY INDUSTRY

A practical compressed air cooling solution for high-capacity compressor applications in demanding industrial environments.

CONSTRUCTION & INFRASTRUCTURE

Ideal for mobile contractors requiring air treatment equipment that operates without an external electrical supply.

ENGINEERING & INDUSTRIAL MAINTENANCE

Helps reduce condensed moisture in compressed air used for suitable pneumatic equipment and industrial maintenance applications.

WHY IS COMPRESSED AIR MOISTURE CONTROL IMPORTANT?

Compressed air leaving a compressor can contain substantial water vapour.

As the compressed air cools, the water vapour condenses into liquid water.

Without effective cooling and moisture separation, this water can enter downstream equipment and cause:

- Abrasive media clogging
- Inconsistent blasting performance
- Corrosion in compressed air systems
- Pneumatic equipment maintenance problems
- Increased operational downtime

The Quantum Blast QB-800CFM addresses these issues by cooling the compressed air and separating condensed moisture before it reaches downstream equipment.

For applications requiring very low moisture or a specified pressure dew point, additional air drying equipment may be necessary.

COMPLETE COMPRESSED AIR & ABRASIVE BLASTING SOLUTIONS

Quantum Blast Technologies supplies a range of industrial compressed air preparation and abrasive blasting equipment, including:

- QB Pneumatic Aftercoolers
- Airman Portable Diesel Compressors
- RapidBlast™ Wet Abrasive Blasting Systems
- GritBlast™ Dry Abrasive Blasting Equipment
- Industrial Air Hoses and Couplings
- Moisture Separation Equipment
- Abrasive Blasting Media
- Blast Hoses and Nozzles
- Operator PPE and Breathing Air Equipment

Our team can assist with matching the appropriate compressor, aftercooler and blasting equipment to your application.

WHY BUY FROM QUANTUM BLAST TECHNOLOGIES?

- Australian-based industrial equipment specialists
- Experienced in wet and dry abrasive blasting applications
- Manufacturers of RapidBlast™ dustless blasting systems
- Specialist compressed air preparation equipment
- Practical equipment selection and technical support
- Compressor and blasting equipment packages available
- Australia-wide freight options

QUANTUM BLAST QB-800CFM – INDUSTRIAL PNEUMATIC AIR AFTERCOOLER WITH MOISTURE SEPARATOR

PRICE: $6,950 + GST & FREIGHT

Contact Quantum Blast Technologies through Machines4U for pricing, availability, technical enquiries and Australia-wide freight quotations.

COOLER AIR. LESS MOISTURE. MORE RELIABLE BLASTING PERFORMANCE.