Refurbished Kaltenbach Cold Saws

Price Overview:
-Price does NOT include transport, installation and commissioning
-The offer is valid only for one month.
-Subject to availability. All listed machines can be equipped with further options upon request.

Technical Overview:
KALTENBACH is synonymous with reliability and durability, with many customers relying on their saws for decades. To extend that performance for years to come, refurbishing your KALTENBACH machine is often the smartest investment. For workshops considering a new saw but constrained by budget, our refurbishment and pre-owned solutions provide the ideal alternative.

KALTENBACH offers complete lifecycle support, from machine refurbishment and retrofits to control and software upgrades. We also supply pre-refurbished used machines in like-new condition, often available from stock. In fact, many machines are already in stock or sourced as pre-loved units, waiting to be reconditioned to order. These solutions deliver outstanding value, quality, and performance throughout their second lifecycle, combining German engineering with cost-effectiveness.

KKS 400 E (No. 116.303, Year 1993)
Equipment: 61 Hydraulic, short stroke clamping cyl., 13/26 m/min
Delivery Time: approx. 2 months

KKS 400 E (No. 120.173, Year 1998)
Equipment: 61 Hydraulic, short stroke clamping cyl., Hydr. Horizontal clamp left & right, 13/26 m/min
Delivery Time: approx. 2 months

KKS 450 H (No. 301.405, Year 2006
Equipment: 251 Hydraulic, long stroke clamping cyl., Hydr. Horizontal clamp left & right, 13/26 m/min / Siemens OP 3
Delivery Time: approx. 2 months

HDM 1431 (No. 122.480, Year 2002)
Equipment: 18.5 kW, 8-30 m/min, Segment SBØ 1430 mm, Working height 640 mm, Mitre cut 45 left / 55 right, New Siemens S7 control with Easycut and Touch Screen
Delivery Time: approx. 5-6 months

KKS 400 NA (No. 123.543, Year 2004)
Equipment: 1.8 / 2.7 kW, 13/26 m/min, New Siemens S7 with Touch Screen
Delivery Time: approx. 3-4 months

KKS 401 NA Easycut (No. 114.055, Year 1991)
Equipment: 5.5 kW, 7-43 m/min, SB Ø 425 mm, CNC angle, trim cut stop, New SIEMENS S7/NA 1000 right, Cut off gripper / Coolant Atomiser
Delivery Time: approx. 3-4 months

KKS 401 NA Easycut (No. 125.408 / 304352, Year 2008)
Equipment: SBØ 450 mm, 5.5 kW, 15-75 m/min, CNC angle, trim cut stop, 1m infeed gripper
Delivery Time: approx. 3-4 months

KKS 463 NA (No. 1008427 / 316071, Year 2022)
Equipment: Extended mitre range, Coolant atomiser, Multiple cuts, Signal column, Trim cut stop, Autom. material width measurement, Autom. hinge belt chip conveyor, Autom. clamping pressure limitation, Proficut, Dynamic sawblade feed control, Safety devices, Material feed right, Cleaned, checked, not fully refurbished
Delivery Time: approx. 5-6 months

RKS 451 NA Easycut (No. 112.283, Year 1990)
Equipment: 13/26 m/min, Coolant Atomiser, Siemens S7 new with Touch, Trim Cut stop / Chip conveyor, Cut off gripper
Delivery Time: approx. 4 months

RKS 451 NA Easycut (No. 118.792, Year 1996)
Equipment: 5.5 kW, 6-43 m/min, Coolant Atomiser, 1 m infeed gripper / No chip conveyor, Trim Cut stop, New Siemens S7 with Touch Screen
Delivery Time: approx. 3 months

KMR 100 AP (No. 125.437, Year 2008)
Equipment: HSS + Carbide Sawblades, Cut-off length up to 300 mm, Incl. Inclined Magazine 6 m, Cleaned, checked, not fully refurbished
Delivery Time: Ex stock

MSK 471 NA (No. 305676, Year 2009)
Equipment: Coolant Atomiser / Width measurement, Cut-off gripper with sorting unit 2.4 m
Delivery Time: approx. 2 months

SKL 450 NA (No. 119.766, Year 1998)
Equipment: New S7 control with Touch Screen, 3.7 / 4.7 kW / Trim Cut Stop, Prep. for chip exhaust system, NC length positioning
Delivery Time: approx. 2 months

SKL 450 H (No. 122.986, Year 2003)
Equipment: 3.7 / 4.7 kW, carbide SBØ 450 mm, 1950-3900 m/min, Horizontal clamp left & right, Short stroke clamping cylinder. D. 80 / 8 mm, Working area illumination
Delivery Time: approx. 2 months

RKL 551 AX (No. 124.219 / 301.632, Year 2008)
Equipment: 6.0 kW / Sound protection cabin, Prep. For the chip exhaust system, the new Siemens control
Delivery Time: approx. 2-3 months

KBS 400 DG (No. 121.337, Year 2000)
Equipment: 3 kW, 15-90 m/min, 34mm sawband, New Siemens S7 / Feed from left, WH 720 mm / Coolant Atomiser / NC angle
Delivery Time: approx. 3 weeks

KBS 620 DG (No. 125.068 / 123.325, Year 2004)
Equipment: 4 kW, 15-90 m/min, 41mm sawband, NC mitre angle / Feed from right, Scribing laser / Coolant system / WH 720 mm, New Siemens S7 with Touch Screen
Delivery Time: approx. 3 months

KBS 750 DG (No. 120.792, Year 1999)
Equipment: WH 640 mm / Feed from left, NC Angle Setting / Hydr. Lowering, Safety devices / New S7 with Touch, 15-90 m/min, NC angle adjustment
Delivery Time: approx. 3-4 months

KBS 400 DGNA (No. 124.306 / 301847, Year 2006)
Equipment: 5.5 kW, 15-100 m/min, 41mm sawband, New safety devices fence & light barrier, Coolant atomiser / Coolant system, Passive blade tracking control / B+R 2005
Delivery Time: approx. 3-4 months

KBS 750 DGNA (No. 301586 / 124.190, Year 2006)
Equipment: NEW B+R control X20 + Windows 10, WH 640 mm
Delivery Time: approx. 3 months

ABQ
Equipment: Cross sorting unit, Sorting length 4,800 mm
Delivery Time: approx. 6 weeks

LM 1 (No. 125508 / 304541)
Equipment: Flat Magazine for KKS/RKS, 6 m, Round and square material, Incl. safety equipment, mounted on the front side
Delivery Time: approx. 3-4 months

The refurbishment process typically includes:
Complete disassembly of the machine
Cleaning, repainting, and inspection of all parts
Replacement of hydraulic hoses, seals, and piston rods
Renewal of rotary or fixed tables
Cleaning, inspection, or replacement of motors
Installation of a refurbished gearbox
Replacement of drive chains and sprockets
Cleaning and inspection of the coolant pump
Overhaul of all cylinders
Replacement/reassembly of ball screws (if installed)
Optional installation of a new Siemens S7 control with touchscreen
And more, depending on the model and configuration

KALTENBACH systems are built for durability, energy efficiency, and low maintenance, ensuring long service life with minimal wear, making them perfectly suited for second-cycle use. All refurbishments are carried out by skilled KALTENBACH experts at our Lörrach production facility, using only genuine spare parts. Every circular saw is proudly Made in Germany.