Round Liquid Waste Dewatering Binx Brand - New and Used

American Design Round Liquid Waste Dewatering Bin Brand New and Used
These innovative American Designed Dewatering Bins will take most types of liquid sludges.
The system can treat up to 90,000 litres of watery sludge day
Please contact Roger on

Dewatering drum is mounted on a roll-off frame making it easily transported.
Drum is supported by greaseable roller bearings.
Drum rotates with roller chain.
Gear box turns by variable speed motor.
There are two doors on the back of the drum; one for inspection while filling, the other hinged door for unloading the dry material. There is an additional manhole port on the front for inspection as well.
Three inch quick cam lock for loading liquid.
Water is constantly being drained while the drum is being filled.
Liquid can be added to drum several times before being rotated.
Once full, or ready to be rotated, the inspection door must be secured before rotating unit.
The ideal speed seems to be one revolution every 2 hours.
The drum always rotates toward the gearbox.
After approximately 5 revolutions the unit is ready to be loaded on a roll-off truck to be emptied.
Drum must be rotated until dry sludge is parallel with the door opening.
Once the material is centered in the bottom of the drum it must be secured for transport.
Securing is achieved by tightening the ratchet with the straps hooked on the frame.
To unload material the wing nuts that secure the door must be loosened
(suggestion: loosening all but one wing nut while the drum is on the ground. This becomes more difficult as machine is higher up once positioned on truck).
Once unit has been emptied it is ready to be rinsed out prior to the next fill.
A normal rinse time would be 10 minutes with a garden hose and spray nozzle.
Unit works well with any liquid that will flocculate.
Results are very predictable and consistent (no surprises).

.itrdewatering