TIGER STOP AUTO PUSHER. TIGER 300SX SEMI-AUTO COLD SAW by MEP Italy. PANDA UPCUT SAW *Sold*

1). TIGER STOP AUTOMATIC PUSHER, COMPLETE SYSTEM INCLUDING 4m INFEED PUSHER ROLLER TABLE PLUS INFEED / OUTFEED ROLLER TABLES (x 3), PROGRAMMABLE, MADE IN USA, HEAVY DUTY, LATE MODEL, AS NEW CONDITION.
WELL BELOW 1/2 NEW PRICE! SUIT ALUMINIUM/WOODWORKING MITRE/DOCKING SAWS etc.
SALE TO 15/7/26 $ 8,450 + GST ($ 9,295 INCLUDING GST).

TIGER STOP: Zero Set Up Time > Increased Productivity > Accuracy100% > Improved Yield > No More Rework > Easy to Use.

2). BROBO WALDOWN 400mm 240v Single Phase COMPOUND MITRE SAW TNF115 Year 2022 UNUSED, BRAND NEW, SUIT ALUMINIUM, P5ASTICS etc 400mm TCT BLADE, SEMI-AUTOMATIC PNEUMATIC OPERATION INCLUDING 2 x VERTICAL PLUS 2 x HORIZONTAL AIR CLAMPS, 90degree + 45degree LEFT & RIGHT SWIVEL, SAW HEAD TILTS TO 45degree COMPOUND MITRE CUT, MIST SPRAY, MADE IN AUSTRALIA, HEAVY DUTY, INCLUDING 2 x 3 metre FACTORY METAL HEAVY DUTY INFEED / OUTFEED ROLLER TABLES, NEW, BOLTED TO ORIGINAL PALLET
SALE TO 15/7/26 $ 6,950 + GST ($ 7,645 INCLUDING GST). REQUEST EXTRA PHOTOS.

3). LEDA POP-UP UNDERTABLE DOCKING SAW Model YFC-18L, 18 inch 450mm TUNGSTEN BLADE, 7.5kw 10hp 415v, HANDS-FREE 2 x PUSH-BUTTON PNEUMATIC CONTROLS, FULL SAFETY GUARDING, EXTRA SAFETY LIMIT SWITCHES, OVERHEAD CONTROLS, MADE IN TAIWAN, CURRENT SERIES, HEAVY DUTY, VERY LITTLE USE, AS NEW CONDITION. 1/2 NEW PRICE!
PACKAGE INCLUDING 3m x 2 INFEED + OUTFEED ROLLER TABLES. NEW PRICE $ 10,900 + $ 3,650 Tables + GST= $ 16,005!
SALE TO 30/4/26 $ 7,250 + GST ($ 7,975 INCLUDING GST). SAVE $ 000's.
FURTHER REDUCTION TO $ 6,950 + GST ($ 7,645 INCLUDING GST) INCLUDING ROLLER TABLES ** SOLD 9/4/26 **
SEE ATTACHED BROCHURE OF SIMILAR SPEC SAW.
Cutting capacities - 51 x 305mm, 76 x 280mm, 102 x 254mm.

4). LUNA MS400 2.2kw 3hp 415v SEMI-AUTO ALUMUNIUM COMPOUND MITRE SAW 400mm BLADE HORIZONTAL AIR CLAMPS, MITRE 45deg ANGLES IN BOTH DIRECTIONS, MADE IN EUROPE, MIST SPRAY, REQUIRES BRACKETS FOR CLAMPS
SALE TO 30/4/26 $ 2,750 + GST ($ 3,025 INCLUDING GST) ** SOLD 30/4/26 **

5). FOM INDUSTRIE PANDA 400 UPCUT SEMI-AUTOMATIC 400mm ALUMINIUM SAW, VERTICAL / HORIZONTAL AIR CLAMPS, MITRE ANGLES IN BOTH DIRECTIONS, MADE IN ITALY , IN SHOWROOM CONDITION. REQUEST EXTRA DETAILS
SALE TO 31/3/26 $ 8,150 + GST ($ 8,965 INCLUDING GST). SAVE $ 000's. BELOW 1/3 NEW PRICE! ** SOLD 24/3/26 **

6). TIGER 300SX by MEP SEMI-AUTO COLD SAW 1.5kw 415v 305mm BLADE, 2-SPEED, HEAD POSITIONING SYSTEM, AIR OVER HYDRAULICS, COMPOUND ANGLE CUTS, VERY HEAVY DUTY Made in Italy, Ex-Government. FRACTION OF REPL COST!
SALE TO 15/7/26 $ 3,950 + GST ($ 4,345 INCLUDING GST). BARGAIN!! REQUEST EXTRA PHOTOS
The saw can cut from 60° right to 45° left. The cutting head moves vertically on two enclosed linear bearings
The operator programs top and bottom position and presses the start button. The vice closes, cut commences with pneumatic feed, after the cut the blade stops, vice opens, and head returns to the programmed top position.
The centralised control panel provides information required incl alarms, diagnostics, pieces cut and cutting time
Four-speed gearbox 15,30,45 + 90 RPM
The rotating table means the blade always aligns with slot to provide a stable working area even when cutting small parts
The vice has an anti-burr device with double clamping of the piece
The steel base is standard equipment with slide-out chip tray and coolant pump.
CUTTING RANGES:
0° round 90 mm
0° square 85 x 85 mm
45° round left 90 mm
45° square left 85 x 85 mm
45° flat left 90 x 60 mm
60° round left 60 mm
60° square left 60 x 60 mm
60° flat left 60 x 80 mm
45° round right 90 mm
45° flat right 85 x 85 mm
45° flat right 90 x 60 mm.

7). MACC Model TRS-300 COLD SAW 2-SPEED 2.2Kw 3hp 415v DIRECT DRIVE SUIT ALUMINIUM & METAL, MADE IN ITALY, CAST IRON BASE, HEAVY DUTY, 300mm TUNGSTEN BLADE, COOLANT PUMP, SWIVEL MITRE CUTS, SINGLE-ACTION DOUBLE VICE, , INCLUDING HEAVY DUTY STAND, GOOD CONDITION. REQUIRES COSMETIC TOUCHING UP
SALE TO 16/7/23 $ 1,250 + GST ($ 1,375 INCLUDING GST) ** SOLD 22/7/23 **

8). HAFCO METALMASTER 315mm COLD SAW Model CS-315D 2-Speed 415v MADE IN TAIWAN, COOLANT PUMP/SPRAY, CAST IRON BASE, HEAVY DUTY STAND, EXTRA BLADES, INCLUDING 2.4m INFEED & 3.3m OUTFEED ROLLER TABLES INCLUDING ALUMINIUM FENCE / FLIP-OVER STOP, GOOD CONDITION. HUGE EOFY PRICE REDUCTION!
SALE TO 30/6/23 $ 1,350 + GST ($ 1,485 INCLUDING GST). REQUEST BROCHURE ** SOLD 27/6/23 *