Used Edgebander SCM Olimpic k360 TER

Very lightly used and presented in near-new condition.
Fully inspected and backed by a 6-month warranty from SCM Australia.

Compact and easy-to-use due to its advanced technological solutions designed to ensure optimal panel finishing. It is a perfect edge bander for small/medium companies who require continuous and high quality edge banding of panels even though they may be different from one to another.

GENERAL DATA
Track feed speed m/min 11
Panel thickness mm 8-60
Thickness of edges in strips mm 0,3-6
Thickness of rolled edges mm 0,3-3
Max. section of rolled edges mm² 135
Coil-holder plate diameter mm 780
Exceeding material to the panel thickness mm 2+2
Distance between two successive panels mm 600
Minimum panel length (100 mm min. width) mm 140
Min. length of edge in rolls mm 180
Min. length of edge in strips mm 220
Min. panel width (210 mm min. length) mm 90

COMPOSITION:

12“ STARTOUCH CONTROL SYSTEM:
SIMPLE AND INTUITIVE USE FOR ERROR-FREE MACHINING

"AAR" ANTI-ADHESIVE UNIT

"RT-V1" PRE-MILLING
It trims the panel edge obtaining a perfect uniform surface for the glue application and a perfect jointing line with the edge.
? two high frequency motors. Motor operation is timed to prevent chipping on the panel
? exhaust hoods
? timed air blower for the cleaning of the machined panel surface
? panel edge trimming with a variable removal, adjusting the infeed fence position by means of knob and numerical readout
? height adjustment of the tools to vary the cutting point
? complete with diamond cutters (H=49mm – D=100mm – Z=2+2).
- Max. removal mm² 60
- Max thickness removal mm 3
- Panel thickness mm 8-45 (60** - with H=64 mm tool)
- Motors power kW 1,5
- Tool diameter mm 100
- Tool rotating speed rpm 9.000

"SGP-E" GLUE POT INSTEAD OF STANDARD "VC-VM" GLUING UNIT
It allows a quick changeover of the glue type/colour. The glue pot is supplied instead of the one supplied as standard.
– specific compact design reduces to a minimum the melted glue before the application in order to maintain the best quality characteristics.
– anti-adherent treatment for EVA or PU glue.
– spreading roller with optimized graining PLASMA anti-adherent treatment
– manual emptying cycle with collection of the residual glue on a removable tank
– automatic locking of glue loss when the machine is stopped (SCM GROUP patent)
– manual dosing adjustment graduated indicator
– quick release device for the removal and easy replacement of the glue pot
– simple and quick access for the internal cleaning with the possibility to disassemble all parts.
– short time of heating of the glue during the starting of the machine thanks to its
– small dimensions
– double thermo-regulation system for an easy use of two types of glue with different melting
Technical data:
- Glue capacity: 1,5 Kg with manual filling

SPRAY-MIST DEVICE FOR DELICATE EDGES

"K-2" END CUTTING UNIT
It carries out the cutting of the front and rear exceeding edge
? 2 high frequency motors
? motor sliding without mechanical plays on prismatic guideways and recirculating ball pads.
? Copying devices for an accurate positioning of blades in relation to the cutting point
? complete with cutters
Motors power kW 0,2
Speed of cutters rpm 12.000
Blades tilting fixed


"R-K" TRIMMING UNIT
It carries out the trimming of the top and bottom exceeding edge
? 2 high frequency motors
? copying rotating discs for an accurate positioning of tools with reference to the working point: vertical rotating discs with single disc and front rotating copying discs with 3 contact points
? exhaust hood
? knobs and numerical readouts for the positioning
? manual exclusion of the unit
? complete with combi cutters (R=2) to machine 3 different types of edge: thin, with radius and solid wood edge
Motors power kW 0,5
Speed of cutters rpm 12.000
Exceeding edge with reference to the panel thickness mm 2+2
Min. panel thickness with radius mm 12
Vertical/front copying devices disc/disc


“ROUND 1” ROUNDING UNIT:
EDGE ANGLES FINISHING ON STRAIGHT AND SHAPED PANELS
It carries out the automatic rounding of front and rear plastic
edges angle of straight panels and panels with “radius”
(see working examples)
? high frequency motor
? front and vertical copying device for an accurate positioning with reference to the working point
? two positions with manual adjustment
? automatic exclusion of the unit
? complete with diamond cutter with radius (R=2)
Motor power kW 0,35
Speed of cutters rpm 12.000
Panel thickness mm 10-45
Minimum panel length mm 280
Distance between two successive panels mm 750
Vertical/front copying pads pad/pad

"RAS-V" EDGE SCRAPING UNIT
It eliminates the presence of notches left from the tools during the trimming from the plastic edges
? rotating copying discs for an accurate positioning of tools with reference to the working point
? manual exclusion of the unit
? knobs and numerical readouts for the positioning
? exhaust hoods and suitable container with filter for long chips
? complete with cutters (R=2)
Minimum panel thickness mm 12
Vertical front copying discs disc/disc

SPRAY-MIST DEVICE FOR EDGE FINISHING


"RC-N" GLUE SCRAPING UNIT
It eliminates any excess of glue in the joint between panel and edge. It is also possible the removal of small edge exceeding (0,1 mm for 1 mm edges).
Suitable for machining panels coming from nesting cycle.
The unit includes:
– vertical copying device with 3 rotating contact points
– throwaway knives
– air blowers for the knives cleaning
– exhaust hoods


"SP-V" BRUSHING UNIT

"Nesting" COPYING DEVICE KIT

TOOLS KIT R=1,5 INSTEAD OF R=2