Used Genox V800F 37kW Single-Shaft Shredder with Infeed and Outfeed Conveyors – Perth

Used Genox V800F industrial single-shaft shredder offered as a complete system with two large conveyors.

Located in Perth, Western Australia, this machine is in good operating condition and has been regularly serviced. The package includes a large infeed conveyor for controlled loading into the shredder and an outfeed conveyor configured to discharge processed material into bulk bags.

The Genox V800F is a heavy-duty, low-speed single-shaft shredder designed for the controlled size reduction of a wide range of recyclable and industrial materials. Typical applications can include plastics, plastic mouldings and purgings, timber, paper and cardboard, textiles, foam, rubber, copper cable and other suitable non-hazardous materials.*

The hydraulic ram automatically force-feeds material against the rotor, providing consistent processing and reducing the need for continuous manual feeding. Final particle size is controlled by the screen installed beneath the rotor.

Manufacturer specifications for the V800F configuration:

37 kW main drive
800 mm shredding width
400 mm rotor diameter
Approximately 80 rpm rotor speed
F-type rotor with 45 replaceable cutting knives
40 × 40 mm rotor knives
Hydraulic force-feeding ram
815 mm ram travel
3.75 kW hydraulic power pack
Two upper and two lower counter knives
Siemens PLC-based electrical control system
Approximate shredder dimensions: 2,800 × 1,800 × 2,090 mm
Approximate shredder weight: 4,150 kg

Included in the sale:

Genox V800F single-shaft shredder
Large infeed conveyor
Outfeed conveyor for loading processed material into bulk bags
Electrical control equipment associated with the system

This is an excellent opportunity for a recycler, manufacturer or waste-processing business seeking a proven industrial shredder without the cost and lead time associated with purchasing and installing a new system.

The machine is available for inspection in Perth. Inspection under power and material trials may be arranged by appointment, subject to site conditions.

Price: $44,500 + GST, negotiable
Removal, loading and transport are the purchaser’s responsibility unless otherwise agreed.

*Material suitability, throughput and final particle size depend on the feedstock, screen, rotor configuration and operating conditions. Prospective purchasers should confirm suitability through inspection or a material trial.