Viking HL475 industrial internal gear pump Baldor 3HP electric motor DN40 1.5"

Viking HL475 industrial internal gear pump with Baldor 3HP electric motor
4 available, price is for 1.

Heavy-duty Viking Pump HL475 internal gear pumping assembly, fitted with a Baldor Reliance 3HP three-phase industrial electric motor.

Designed for industrial liquid transfer, circulation, filtration and lubrication applications. The Viking 475 series features a compact, motor-mounted design with positive displacement internal gear pumping action.

Four similar assemblies available, each with attached pipework and fittings as pictured.

Pump specifications
Manufacturer: Viking Pump (IDEX Corporation)

Model: HL475

Serial number: 11133147 (pictured unit)

Pump type: Internal gear positive displacement pump

Construction: Cast iron pump housing

Drive arrangement: Close-coupled / motor mounted

Nominal capacity: Up to 30 US GPM (approximately 6.8 m³/hr)

Maximum rated pressure: 100 PSI (approximately 7 bar)

Maximum pump speed: 1800 RPM

Standard port size: 1½ inch

Sealing arrangement: Mechanical seal (model specification)

Built-in pressure relief valve arrangement

Electric motor specifications
Manufacturer: Baldor Reliance

Motor type: Industrial three-phase induction motor

Specification number: 35N383P797H2

Rated output: 3 HP (approximately 2.24 kW)

Voltage: 208–230/460V

Frequency: 60Hz

Speed: 1750 RPM

Current: 9.1–8.4/4.2A

Phase: 3 phase

Frame: 182C

Enclosure: TEFC (Totally Enclosed Fan Cooled)

Insulation class: F

Service factor: 1.15

Nominal efficiency: 87.5%

Power factor: 78%

Duty: Continuous

Manufacturer: USA

Features
Heavy-duty Viking internal gear pump

Baldor Reliance industrial electric motor

Compact direct motor-mounted configuration

External pipework and threaded fittings fitted

Suitable for various industrial liquid pumping duties, subject to fluid compatibility

Four similar assemblies available

Condition
Used industrial equipment showing signs of previous service, including surface corrosion on some pump housings, fittings and fasteners, paint wear and general handling marks.

Assemblies have not been operationally tested. Internal pump condition, mechanical seals, motor performance and suitability for service have not been verified.

Sold as pictured, in as-is condition.

Important: The fitted motors are rated for 60Hz operation. Australian 50Hz supply compatibility must be assessed by a qualified electrician or engineer before use. Motor operation at 50Hz cannot be assumed suitable without checking voltage, speed, current and pump loading.

Dimensions and weight
Approximate dimensions per assembly:

Length: 1010mm

Width: 400mm

Height: 200mm

Weight: 45kg

Measurements are from handwritten identification and should be confirmed before freight booking.

Freight and collection
Commercial freight or collection by arrangement.

Please contact us for quantity enquiries, inspections or freight details.

Price is per complete pump and motor assembly. Four similar units available.

Please check out my store, for a wide range of pumps and other specialty industrial process pumps.

The price includes GST and a tax invoice will be supplied

Contact and inspection of goods

Please contact Tim Marshman with any questions. This item may be inspected by appointment at 9 Vernon Smith Court, Ottoway, South Australia