Wire Rope Hoist - 5t

Looking for a wire rope hoist you can maintain with parts from your local distributor? The Tragen range covers 1 t to 100 t across four configurations. Each hoist is configured to your crane, duty and site before it is built.

TRL Low Headroom 5t Wire Rope Hoist

KEY SPECS
• Lifting height: 6 m to 30 m
• Duty class: FEM / ISO M4 to M7, matched to your load spectrum
• Motors: IP55, 60% ED, Class F insulation
• Reeving: 2-fall, 4-fall or 8-fall depending on model
• Brakes: DC disc brake rated beyond 1,000,000 cycles

WHY BUYERS CHOOSE TRAGEN
• SEW-EURODRIVE hoist gearmotors on every unit, with worldwide parts and service support
• Schneider Electric control gear and Altivar ATV320 drives, all off-the-shelf catalogue parts with nothing proprietary
• Drive settings backed up against your serial number, so a replacement drive arrives pre-programmed
• Modular build: gearmotor, drum, brake, trolley drive and panel swap out as assemblies, so you're back running faster
• Shared spare parts across all four models, so one spares holding covers a mixed fleet

STANDARD FEATURES
• Overload protection and load spectrum recording
• Variable speed drive on cross travel (ramp-and-hold control)
• Rotary cam limit switch, rope guide with pressure rollers, slack-rope protection
• Forged DIN 15401 hook with hands-free safety latch
• Control panels wired to AS/NZS 3000 and AS 5230
• Full circuit numbering for faster fault-finding

OPTIONS
• Hoist VSD
• Anti-sway
• Microspeed/fine positioning
• Zone limiting and anti-collision
• Radio remote
• Load display
• Brake monitoring
• Marine-grade or galvanised finishes.

COMPLIANCE & PAPERWORK
Designed to AS 1418 and independently certified by an RPEQ engineer. Every hoist is load-tested before dispatch. Each one is supplied with proof load, rope and hook certificates, GA drawings, electrical schematics, an operating manual and a maintenance schedule.

WARRANTY & SUPPORT
12 months from commissioning. Extended terms are available. Commissioning support and operator familiarisation are available.

SUITS Mining workshops, steel fabrication, power generation, manufacturing, ports and rail, and water/waste treatment.

TO QUOTE, TELL US: Capacity, span, available headroom, lifting height, lifts per hour, typical loads, and whether it will run indoors or outdoors. We'll recommend the right model and configuration.