CASAGRANDE C6 TRACK DRILL PACKAGE – 2 MACHINES – $95,000
2 x Casagrande C6 Hydraulic Track Drills | Package Price $95,000 + GST
An excellent opportunity to secure two proven Casagrande C6 hydraulic track drills as a package.
These older-generation C6 machines offer simple, robust operation with minimal electronics, making them well suited to contractors looking for reliable and maintainable equipment without the complexity of newer electronically controlled rigs.
Both machines are located in Yatala, QLD and are offered together for $95,000 + GST.
---
MACHINE 1 – CASAGRANDE C6 TRACK DRILL (D11)
Older-generation, mechanically simple C6 track drill in working condition.
This machine is fitted with the stronger T1600 rotary head, providing greater capability for larger DTH hammer applications.
The unit was previously fitted for Jet Grouting and includes the jet grout monitor.
Specifications & Equipment
* Rotary Head: T1600
* Clamps: M4 – 65mm to 300mm
* Clamp Opening: 300mm
* Stroke: 4.0m
* Winch: 1 tonne
* Oiler/Lubricator
* Foam Pump
* Jet Grout Monitor
* Previously configured with Jet Grout system
* Stronger rotation head suitable for larger DTH hammer applications
* No known oil leaks
Known Maintenance
The machine is engine and hydraulics are operational; however, two new solenoids are required on the rotary head control. The hydraulic hose real assembly requires attention also.
---
MACHINE 2 – 2001 CASAGRANDE C6 TRACK DRILL (D4)
Year: 2001
A proven C6 in good working order and an ideal entry-level machine for lateral support, anchoring and general foundation drilling applications.
Powered by a Deutz engine with minimal electronics, this machine provides straightforward operation and maintenance.
Repair work to the cylinder and bearings was completed approximately two years ago.
Specifications & Equipment
* Engine: Deutz Tier 3
* Rotary Head: T1250 – P130
* Clamps: M2 – 40mm to 254mm
* Stroke: 4.0m
* Minimal electronics
* Includes 1 x 3m long, 250mm diameter auger
Known Maintenance
The air swivel requires attention.
---
TWO MACHINES – ONE PACKAGE
These machines provide a practical opportunity for a contractor wanting to expand their drilling capability, establish an entry-level piling or anchoring setup, or secure a second machine for backup and additional project capacity.
The package provides two different rotary head configurations, including the heavier T1600 setup for larger DTH applications.
PACKAGE PRICE
$95,000 + GST FOR BOTH MACHINES
Location: Yatala, QLD
Machines are used and sold in their current condition. Known maintenance requirements have been disclosed above.
Contact Pilecom Equipment for further information, additional photos, inspection arrangements or to discuss the package.
Facebook
Twitter
Email a Friend
SOMERSBY, NSW - Delivers Nationally 
Print
******8329 
