1.5-4 ton (35mm pin) 420mm Excavator GP Digging & Trenching Bucket (needs repair)

Used 420mm Excavator GP Digging & Trenching Bucket suit 1.5-4 Ton machines.

This Bucket has had very little use. The teeth & side cutters have very little wear, the side cutting edges have no wear.
However it was left in a paddock to collect water and has rusted out the bottom.

There is still some meat on the underside wear strips, so all it would need is some sheet steel welded inside and you have a good bucket with plenty of life left.
Alternatively you could cut off the headstock to weld onto another attachment.

The price has been heavily reduced to allow for some work to be done.


* It has a deep profile for a high capacity.

* It has tapered sides so mud slides out easy and minimises ground resistance.

* It has removable bolt-on Side Cutters (in almost perfect condition).

* There are extra Wear Strips welded underneath for durability (partly rusted but still lots of meat, see pic #10).


*** Current Headstock configuration:
* Pins: 35mm
* Pin Center to Pin Center (CtoC): 200mm
* Between the Ears (BTE): 144mm.
*
* Should fit: Bobcat 331 / 430, Komatsu PC 20-7 / PC 25-1 / PC 27R-8 / PC 28UU-2 / PC 30-6 / PC 30-7 / PC 30R-8 / PC 30MRX / PC 30MRX-1 / PC 35R-8 / PC 35R-8E / PC 38UU-2.
*
* Maybe fit: Airman AX22 / AX29U / AX30UR, Case CX 23 / CX 25 / CX 26 / CX 28 / CX 30 / CX 31, Daewoo Solar 027 / 030, Hanix H26B-2 / H30B-2, Hitachi EX22 / EX25, IHI (Cheiftain) 25G/H/J / 28G/H/J / 30G/H/J, IHI 30NX, Kobelco SK 20 / SK 20SR-3 / SK 24 / SK 25 / SK 25SR / SK 25SR-2 / SK 27 / SK 27SR-2 / SK 27SR-3 / SK 28 / SK 30 / SK 30SR Pre 2001 / SK 30SR / SK 30UR, Libra 225S, Nagano NS 25-3, New Holland EH 27.B, SMC MX30, Takeuchi TB 25 / TB 26 / TB 28FR / TB 125, Yanmar B 22 / VIO20 / VIO20-1 / VIO20-2 / VIO20-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Dimensions: 496mm Wide (at the side cutters), 652mm Deep, 527mm High. Weight: 48kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.