Used Excavator Hydraulic Quick Hitch Coupling to suit 15-32 Ton machines.
The front hooks that grab the bucket's front pin have been extended (see pics# 4, 6, 9) to pick up attachments with a longer Pin Center spacing (full details below).
Condition is Used, but is otherwise in good working condition with plenty of life left.
Has Rear Lifting Eye Hook.
*** Pin Setup Dimensions (where your Dipper Arm/Stick goes in):
* Pin Diameter: 80mm.
* Pin Center to Pin Center (CtoC): 445mm.
* Between The Ears (BTE): 307mm Between the inside Ear Bosses of the hitch (which can be shaved back up to 340mm between the Ear Plates if you need more inside width for your excavator's dipper arm to fit in).
Should fit the following machines: Case 9021 / CX160 / CX210 / CX210B / CX225SR, JCB JS150LC / JS160 / JS160LC / JS180 / JS200 / JS200LC / JS210 / JS220 / JS220LC / JS235, Link-Belt 160LX / 160X2 / 210LX / 225SA / 2700 QUANTUM / 2800 QUANTUM, Sumitomo SH150 / SH160 / SH200 / SH200-2 / SH200-3 / SH200LC / SH200LC-3 / SH210-5 / SH215U-1 / SH215X-1 / SH225X-3.
Maybe fit the following machines: Caterpillar 318B L / 320 / 320B w/B Link / 320D w/B Link / 321 / 322B w/B Link / 322C w/B Link / 322C w/Reach Linkage / 324D w/Reach Linkage / 330C / 330D w/Long Linkage / E300 Series / B Family Linkage, Daewoo Solar 170LC-V / 170W-3 / 175LC-V / 200W-3 / 200W-V / 220LC-V / 225LC-V / 225NLC-V / 225SLR / 250LC-V / 255LC-V, Doosan DX180LC / DX180LC-3 / DX180W-3 / DX190W / DX210W / DX225 / DX225LC-3 / DX255 / DX255LC-3 / S175LC-V / S180W-V / S210W-V / S225LC-V / S255LC-V / S470LC-V, Halla HE280, Hitachi EX150-5 / EX160 / EX165 / EX200 / EX215 / FH165 / FH200 / FH215 / Zaxis 160 / Zaxis 200 / Zaxis 200 & LC / Zaxis 210 / Zaxis 225US LC / Zaxis 225USR, Hyundai R210LC-7, John Deere 200C LC / 200D LC / 225C LC RTS, Kobelco 200SRLC / SK200 / SK210 / SK210LC / SK210LC-VI / SK235SR, Komatsu PC200 / PC200 Mighty / PC200-3 / PC200-5 / PC200-6 / PC200-7 / PC200LC-8 / PC210 / PC210-6 / PC220-3 / PC220-5 / PC220LC-6 / PC220LC-7 / PC220LC-8 / PC240 / PC250-6 / PC270 / PC270LC-6 / PC270LC-7 / PC280 / PW210, Liebherr 912 / 912 LITRONIC / 922 LITRONIC, LiuGong 922 / 925, New Holland EH215LC, Samsung SE210 Early Series / SE210-3 / SE210LC-3, Terex TXC 175LC / TXC 180LC / TXC 225LC / TXC 255LC, Volvo EC210 / EC210B / EC210C / ECR235C / EW230C / MX225LS / SE210LC-3 and possibly other machines with similar pin spacings.
*** Pin Setup Dimensions (where the Hitch goes in your bucket):
* Pin Diameter: 80mm.
* Pin Center to Pin Center (CtoC): 485-512mm (approx, the range could possibly go lower than 485mm).
* Between The Ears (BTE): 305mm (your buckets/attachments need to have at least this much width between the ears).
Should fit buckets from the following machines: Caterpillar 320 / 320B w/C Link / 320C w/C Link / 321 w/Mass Linkage / 322C w/Reach Linkage / 325B w/C Link / 325C w/C Link / 325C w/Reach Linkage / E300 Series / C Family Linkage, Doosan DX255 / DX255LC-3, Hyundai R250LC-3 / R280LC / R290LC / R290LC-3 / R290LC-3LR, Kato 820, Komatsu PC290.
Maybe fit buckets from the following machines: Halla HE280, Hitachi EX200 / EX215 / FH200 / FH215, Hitachi Zaxis 200 / 200 & LC / 210 / 225US LC / 225USR, John Deere 200C LC / 200D LC / 225C LC RTS, LiuGong 922 / 925.
Hitch dimensions: 840mm long, 516mm wide, 575mm high. Weight: 258kg.
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.