90mm/80mm pin Excavator Headstock to suit 17-36 ton machines. There is some surface rust and light pin wear but is otherwise in good condition.
Can be used for a mounting headstock for a Rock Breaker Hammer or Auger, or mount as a regular headstock for buckets and other attachments etc.
The 2 fins could be cut off to make a standard flat plate headstock.
Mounting plate is: 600mm wide x 650mm long x 32mm thick.
The 90mm Pin could be milled down in the middle to make an all-80mm pin headstock.
Or the 80mm pin could be sleaved to 90mm or the bosses could be bored out to 90mm to make an all-90mm pin headstock.
Current Headstock setup:
One Pin is 90mm Diameter the other 80mm, 510mm Pin Center to Pin Center (CtoC), 385mm Between the inside Ear Bosses (which can be shaved back up to 462mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
*** Current 90mm / 80mm Pin configuration:
Should fit: Caterpillar 322 / 325B w/D Link / 325C w/D Link / 325C w/Mass Linkage / 330B w/D Link / 330C w/D Link / 330C w/Reach Linkage / 330D w/D Link / D Family Linkage and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
*** Possible all-80mmm Pins configuration:
Should fit: Hyundai R250LC-3 / R280LC / R290LC / R290LC-3 / R290LC-3LR, Kato 820, Komatsu PC290.
Maybe fit: Caterpillar 320 / 320B w/C Link / 320C w/C Link / 321 w/Mass Linkage / 322C w/Reach Linkage / 325B w/C Link / 325C w/C Link / 325C w/Reach Linkage / E300 Series / C Family Linkage, Daewoo Solar 170LC-V / 170W-3 / 175LC-V / 200W-3, / 200W-V / 220LC-V / 225LC-V / 225NLC-V / 225SLR / 250LC-V / 255LC-V, Doosan DX180LC / DX180LC-3 / DX180W-3 / DX190W / DX210W / X225 / DX225LC-3 / DX255 / DX255LC-3 / S175LC-V / S180W-V / S210W-V / S225LC-V / S255LC-V / S470LC-V, Halla HE280, Hitachi EX200 / EX215 / FH200 / FH215, Hitachi Zaxis 200 / 200 & LC / 210 / 225US LC / 225USR, Hyundai R210LC-3 / R210LC-7, John Deere 200C LC / 200D LC / 225C LC RTS, Kato HD1023, LiuGong 922 / 925, Samsung SE210 Early Series / SE210-3 / SE210LC-2 / SE210LC-3, Terex TXC 175LC / TXC 180LC / TXC 225LC / TXC 255LC, Volvo EC210 / EC210B / EC210C / ECR235C / EW230C / MX225LS / SE210LC-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
*** Possible all-90mmm Pins configuration:
Should fit: Daewoo DX300 LC, Daewoo Solar 290LC-V / 300LC-V / 300LC-V SLR, Doosan DX300 / DX300LC-3 / S300LC-V / S470LC-V, Hyundai R250LC-7 / R290LC-7, Kobelco SK220 / SK230 / SK250 / SK250LC / SK300 / SK310 / SK320 / SK330, Komatsu PC300 / PC300 Mighty / PC300-3 / PC300-5 / PC300-6 / PC300-7 / PC300LC-7 / PC340 / PC350 / PC360, Samsung SE280LC, Volvo EC240B / EC240C.
Maybe fit: Case CX240 / CX290 / CX330, Caterpillar 235, Daewoo Solar 280LC-2 / 280LC-3 / 320 / 330-3, Halla HE280, Hitachi EX220 / EX255 / EX270 / FH220 / FH285, Hitachi Zaxis 230 / 230 & LC / 240 / 250 / 270 / 270LC, JCB JS240 / JS240LC (XO Machines) / JS260 / JS260LC (XO Machines), John Deere 240D LC / 270D LC, Kato 1800 / 1220SE2 / 1250SE / HD700SEV / HD900SEV, Kobelco SK290LC / SK330LC / SK350LC, Link-Belt 240LX / 290LX / 330LX / 3400 QUANTUM / 3900 QUANTUM, New Holland EC240LC / EC270LC, Samsung SE240LC / SE240-3 / SE280-3, Sumitomo SH220 / SH220-2 / SH220-3 / SH220LC / SH240 / SH290 / SH300-3 / SH300-5 / SH300LC-3 / SH330-5 / SH350HD-3, Volvo EC240 / EC290 / EC290B / EC290C / ECR305C / MX255LS / MX295LS / SE240LC-3 / SE280LC-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
Shipping dimensions: 640mm Wide, 880mm Long, 610mm High. Weight: 300kg.
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.