2020 CATERPILLAR 330

Year
2020
Manufacturer
CATERPILLAR
Model
330
Hours
2,008
Serial Number
KEL11234
Condition
Used
Stock Number
330234
Generation / Build Number
07B
Description
Used 2020 Cat 330 HEX CFG1A Excavator
Build 07B Machine
Tier II C7.1 Engine
S/N: KEL11234
SMU: 2008Hrs approx.
Comes with:
ROPS ISO A/C Cabin
Bedrock Q/Coupler
3.2M Reach Arm Fitted
6.1M Reach Boom Fitted
GP Rock Bucket
Rear Camera
Hammer Piping
24' Triple Grousers
Safety Crane Valves fitted to Cylinders.
Attachments
Number of Buckets
1
Bucket Size
1.8 m3
Bucket Width
160 cm
Category Specific
Auxiliary Hydraulics
Yes
High Pressure Hydraulics
Yes
Coupler
Yes
Quick Attach
Yes
Arm Length
3.2 m
Grade Control Ready
Yes
Reach Type
Standard
Boom Type
1-Piece
Boom Size
6.15 m
Exterior
ROPS
Enclosed
Interior
A/C
Yes
A/C Condition
Good
Heater
Yes
Keyless Start
Yes
Engine
Engine Manufacturer
Caterpillar
Engine Model
C7.1
Engine Serial Number
E7A
Engine Tier
EUR Stage II
Turbo
Yes
Eco Mode
Yes


Overview
Moving the Standard Higher
The Cat® 330 raises the bar for performance and fuel efficiency in this size class. With an equipment line full of world-class standard factory technology, a cab focused on operator comfort and productivity, plus lower fuel and maintenance costs, the 330 will set a new pace for productivity and profit in your operation.

Benefits
HIgh Fuel Efficiency
With larger hydraulic pumps, an advanced electro-hydraulic system, and increased bucket capacity, this machine delivers high productivity per unit of fuel.

Low Maintenance Costs
Fewer maintenance items paired with extended and more synchronized maintenance intervals increases uptime and reduces costs.

High Operating Efficiency
Offering world-class standard factory-equipped technology to help improve operation output, including Cat Grade with 2D, Grade with Assist and Payload.

Low CO2 Emissions
The 330 emits lower CO2 emissions compared to the previous 330F.

Larger hydraulic pumps and an advanced electro-hydraulic help improve fuel efficiency.

Lift more with improved lift capacity and increased bucket size over the 330F excavator.

Make working on slopes easier with improved swing torque over the 330F excavator.

Standard Cat® technologies help reduce operator fatigue and maintenance costs, increasing operating efficiency.

The C7.1 engine can run on biodiesel up to B20 and meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Stage V emission standards with an after treatment system that requires no maintenance or downtime.

The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements

Match the excavator to the job with power modes; let Smart mode automatically match engine and hydraulic power to digging conditions.

Advansys™ bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.

Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.

Available Smart Boom™ lets the boom freely travel up and down without using any pump flow so operators can focus on stick and bucket work. The benefits are reduced operator stress and reduced fuel consumption.

Don’t let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 50° C (122° F) with de-rate and cold start capability of –18° C (0° F). An optional – 32° C (–25° F) cold start package is available.
Show Less

The latest operator oriented User Interface (UI) has been designed to maximize uptime by allowing operators to easily reorder work tool lists and quickly create new work tool combinations. It also eliminates the need to measure up again when changing Cat® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.

Leverage standard Cat Grade with 2D system with indicate-only and laser capability to help boost productivity.

Want a 3D system to improve your digging results? Caterpillar's single antenna global navigation satellite system (GNSS) makes it easy by giving you visual and auditory guidance to grade. Plus, you can create and edit designs on the touchscreen monitor while you’re on the job. If your application calls for a dual antenna system, it’s easy to upgrade.

Upgrade to our dual antenna GNSS for maximum grading efficiency. The system lets you create and edit designs on the touchscreen monitor while you’re on the job, or you can have the plan design sent to the excavator to make your work easier. Plus, you get added benefits of avoidance zones, cut and fill mapping, lane guidance, and augmented reality along with advanced positioning capability.

All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.

The Cat Grade 3D Ready option includes all the hardware required for the Grade with 3D system, installed and tested from the factory. Activation requires the purchase of additional 3D software licenses.

Standard Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging.

Keep the tracks on ground in lifting and hard digging with Boom Assist.

Set your desired bucket angle and let Bucket Assist automatically maintain the angle in sloping, leveling, fine grading, and trenching applications.

Automatically stop excavator swing at operator-defined set points in truck loading and trenching applications with Swing Assist, which will help you use less effort and consume less fuel.

Cat Payload helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material--with a bucket and thumb combination or grapple and clamshell attachments--and get a real-time weight estimate without swinging.*

Advanced Payload is a system upgrade that offers expanded features and capabilities, including custom tags, daily totals, and electronic ticketing (E-Tickets).*

Combine Payload with VisionLink® and remotely manage your production targets.

Optional Operator Coaching is an in-cab system that recognizes specific opportunities for operators to be more productive and prevent unnecessary machine wear and tear.

Get in and out of the cab easier using the tip-up left console.

Feel more comfortable in the cab while you work with reduced cab vibrations from advanced viscous mounts.

Control the excavator comfortably with easy-to-reach controls all located in front of you.

Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.

Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

Make operating easier with the touch of a joystick button. Additional auxiliary relays allow you to power on or turn off a CB radio, beacon light, and even a dust suppression watering system without taking your hands off the joysticks.

Start the engine with a push button; use a Bluetooth® key fob, or the unique Operator ID function.

Make operating easier with the touch of a joystick button. Additional auxiliary relays allow you to power on or turn off a CB radio, beacon light, and even a dust suppression watering system without taking your hands off the joysticks.

Navigate quickly on the standard high-resolution 203 mm (8 in) touchscreen monitor, or with the optional 254 mm (10 in) touchscreen monitor, or with the aid of the jog dial control.

Protect your hammer tool from overheating and rapid wear. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds - all to extend the tool’s service life.

Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.

The Cat® PL161 attachment locator is a Bluetooth device designed to let users know where their attachments are across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The PL161 integrates easily into VisionLink® for full fleet management of machines and attachments from one smartphone or tablet dashboard to view location and tracking details.

Save more time and energy with the available work tool recognition feature. A simple shake of the attached tool confirms its identity and ensures all the attachment settings (pressure, flow, and dimensions) are correct so you can work quickly and efficiently.*

Auto Dig Boost increases power by up to 8% for better bucket penetration, shorter cycle times, and greater payloads.**

Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.

Need more lift during your shift? Turn on Auto Heavy Lift and get up to 8% more power exactly when you need it for as long as you need it.**

Tiltrotator attachments-ours or other brands-work seamlessly with Cat 2D Grade, Assist, Payload, and E-Fence. With no additional hardware required, all you have to do is simply select "Third Party Tiltrotator System Installation" in the monitor, do the calibration, and get to work.

Expect lower maintenance costs compared to the 330F.

Do all daily maintenance at ground level.

Check engine oil level quickly and safely with the ground-level engine oil dipstick; fill and check engine oil on top of the machine with a conveniently located second dipstick.

Track your excavator’s filter life and maintenance intervals via the in-cab monitor.

Do no required maintenance on the Cat® Clean Emissions Module.

Using Cat genuine oil and filters and doing your typical S·O·SSM monitoring will extend the current service interval to 1,000 hours, giving you greater uptime to do more work.

Expect the latest air intake filter with pre-cleaner to last up to 1,000 hours.

The latest hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval.

High-efficiency cooling fans run only when needed; you can program intervals so they automatically reverse to keep cores clean without interrupting your work.

S·O·S ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.

Boost productivity with proactive service reminders. The integrated vehicle health management system alerts the operator with step-by-step service guidance, along with parts needed, so you don't experience any unnecessary downtime.
Show Less