Used 300mm Excavator GP Digging & Trenching Bucket suit 3-7 Ton machines.
Designed for Kubota KH151 / KH161-3 / KH191 / KX151 / KX161-2 / KX161-3 / KX191 / RX501 / U45 etc. but will fit other machines (see below list of machines we have found so far).
Condition is used but it is a sturdy bucket with plenty of life left.
The width is tapered so mud slides out easily and it comes with 2 extra spare teeth as pictured
The side cutting edges are extra thick and there are bolt holes on the sides if you wish to add side cutters.
There is also extra wear strips welded underneath for durability (see pic# 10) though they do show some signs of wear (they have been doing their job protecting the bottom).
Current Headstock configuration:
45mm Pin Diameter, 245mm Pin Center to Pin Center (CtoC), 146mm Between the inside Ear Bosses (which can be shaved back up to 195mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
Should fit: Hitachi EX 58MU, Komatsu PC 40 / PC 45R-8 / PC 45R-8E / PC 58UU-3, Kubota KH151 / KH161-3 / KH191 / KX151 / KX161-2 / KX161-3 / KX191 / RX501 / U45, Yanmar YB 50.
Maybe fit: Airman AX40 / AX40U / AX50U / AX50UU, Bobcat 337 / 435 / X335 / X337 / X341, Case CX 47 / CX 50B, Caterpillar 304C CR / 304CR-ISJ / 305C CR / 305CR-ISJ, Daewoo Solar 055 / 055V / 055V PLUS, Doosan S 55-V, Hitachi EX 40 / EX 40-2 / EX 40U / EX 45 / EX 50U / EX 55UR / EX 55UR Import, Hitachi Zaxis 40U / 40U-2 / 50U, Hyundai R 55 / R 55-3 / R 55S, Kobelco 45SR-2 / 50SR-3 / SK 40SR-2 / SK 40SR-3 / SK 45 / SK 45SR / SK 45SR-2 / SK 45SR-3 / SK 50SR-3 / SK 50UR-2, Komatsu PC 40-7 / PC 40-7E / PC 40FR / PC 40MR-2 / PC 40MRX / PC 40R-8 / PC 45-1 / PC 50FR / PC 50MR-2 / PC 50MRX-2 / PC 50UU-1 / PC 50UU-2, New Holland EH 50.B, Pel Job EB506, Samsung SE 50W, Takeuchi TB 45 / TB 53FR / TB 53R / TB 145, Volvo ECR 58, Yanmar B 50 / B 50-2 / VIO40-1 / VIO40-2 / VIO40V / VIO45 / VIO50 / VIO50-1 / VIO50-2 / VIO55 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
Overall dimensions: 318mm Wide (at the teeth), 870mm Deep, 705mm High. Weight: 92kg (with the spare teeth).
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.