3HP KNEE MILLING MACHINE - MANFORD AVEMAX, MADE IN TAIWAN

450TM

Spindle material made from SCM440 Cr-Mo steel alloy with tempering treatment.
Centralized one shot lubrication system for ways, nuts and leadscrews.
Precise angular contact spindle bearing.
8 speeds step-pulley drive (16 speeds is optional).
Unique design on Hi-Low gear speed commutation, bearings support on both sides of spindle pulley.
Adjustable brake handle increases the life of brake shoe.
Lifting screw diameter 38mm.
Longer saddle (650mm) support to the table provides high accuracy and rigid machining.
Turcite-B coated on X Y ways.
Square way design on Y.


450VS

Spindle material made from SCM440 Cr-Mo steel alloy with tempering treatment.
Centralized one shot lubrication system for ways, nuts and leadscrews.
Precise angular contact spindle bearing.
Variable speed drive up to 4500 rpm/60Hz 3750rpm/50Hz
Unique design on Hi-Low gear speed commutation, bearings support on both sides of spindle pulley.
Patented special copper alloy SAM214 for vari-disc keys with precise ground and grease lubrication groove design to prevent overheating.
Bearing support to the end of motor shaft.
Double sided vari- disc belt provides lower noise level.
Motor shaft material made from SAM425 Cr-Mo steel alloy, diameter 28mm
Lifting screw diameter 38mm
Longer saddle (650mm) support to the table provides high accuracy and rigid machining.
Turcite-B coated on X Y ways.
Square way design on Y.

PRICING INFORMATION:-

450TM, R8/NST#30, Head- 8 STEPS, 3HP/3PH/220V, (50or60HZ) $ 19,969
450VS, R8/NST#30, Head- Variable Speed, 3HP/3PH/220V, (50or60HZ) $ 21,362

Specification 450TM / 450VS
Table size 254x1270mm (10”x50”)
T-slot of table (Q’ty x size) 3x16mm (3x0.63”)
Longitudinal travel (X axis) Manual 870mm(34.3”), Auto 790mm (31.1”)
Cross travel (Y axis) 370mm (15”)
Vertical travel of knee (Z axis) 406mm (16”)
Ram travel 560mm (22”)
Quill travel 127mm (5”)
Spindle taper NST#30/R8 (Opt. NST#40)
Spindle to table nose 100~506mm (4”~20”)
Spindle center to column 159~719mm (6.25”~28.3”)
Over swivel on turret 360?
Head swivel (R&L) +/-45?
Head tilt (up&down) +/-45?
Spindle motor 3HP
X axis motor Option: Power feed
Lifting motor Nil
Quill feed 0.04~0.08~0.14 mm/rpm (0.0016” ~ 0.003” ~ 0.006”)
Spindle speed Step head 50Hz: 66~2270rpm
60Hz: 80~2720rpm
Variable speed head 50Hz: 50~3750rpm
60Hz: 60~4500rpm
X axis rapid speed Nil
Lifting motor speed Nil
Overall height 2120mm (83.5”)
Overall depth 2073mm (82”)
Overall width 1680mm (66”)
Net weight 1250Kgs (2730lbs)

Standard Accessories applicable to mentioned prices. Please check additional accessories pricing mentioned in the photos, applicable to all models. For any understanding and clarification, please contact sales.

In the attachment some photos are for reference purpose only. Please contact for more information.

All our machines come with strict quality control checks, and certificates issued to the machines come along with the machine despatch.
A one-year standard warranty is applicable to all our machines and models. We offer additional warranty and services upon request, so please contact us for further information.
All our sales, prices, and information strictly adhere to our terms and conditions. Please contact us and demand the terms and conditions information document. Customers can also visit our for more information.
Our skilled service engineers and technicians are available to come to your site for machine installation and training. We have the capability to keep your machine operational at all times with on-time spare parts delivery, whether they are general consumables or critical.
We continuously enhance our capabilities and provide support to our customers, fostering strong relationships with them.

*Please note* that prices may vary slightly due to international foreign exchange rates. For the final product quote, kindly contact our sales team.