AZTC20 Compact Thermocutter

These hot knife Thermocutters feature an electrically (240V) heated blade designed for cutting all thermoplastics easily and effortlessly. Heats up instantly. Transformer steps voltage down to a safe level. Cuts through material up to 5 inches thick.This hot knife Thermocutter is designed for continuous, industrial operation— including on-off batch production, use at a central work station or on-site.

The cutting handle is connected to the base unit by a 9½ foot long 3-line electrical cable. Two lines are for AC power. The on/off switch in the handle electronically actuates the controller in the base unit on the third line using very little power. This 3-line cable design decreases temperature buildup in the handle.

Blades are changed quickly and easily. Temperature of the blade is adjusted by the variable controller on the base unit. This ensures that the blade is evenly heated to the temperature suitable for the application.

For automatic operations requiring the cutting blade to be built in, there is a special robotic handle available at the same price.

Easily Cuts:

Rubber
PVC
Polyethylene
Polypropylene
ABS (Acrylo-Nitrile Butadiene
Styrene)
Polystyrene
Polyamide
Cork
Styrofoam
Adhesives


Use With:

Sheet Stocks
Plastic Pipe
Flooring and Tiles
Cable Conduit
Webbing
Die-Cast Parts
Molding Sprues
Flashing
Foamed Plastics
Corrugated Sheet



Weighs only 11½ oz.
Features an electrically heated blade
For cutting thin plastics, foams and synthetic fabrics easily and effortlessly
Heats up instantly
Temp 0 to 1050 degree F
Designed for on/off operation
Electronically controlled
Cuts through material up to 5 inches thick depending on density
Convenient thumb temperature adjustment
Pulsating current for use with larger blades