Casadei Industria E500CR Automatic Edgebander with corner rounding, Manufactured in Italy
Features:-
Gluing unit
PERFECT GLUING, QUICK AND PRACTICAL SET-UP
6 heating elements to guarantee uniform glue temperature
Motorized glue spreading roller with an internal electrical heating element
Teflon-coated glue pot to permit complete and rapid cleaning
End Trimming unit
PERFORMANCE AND VERSATILITY
2 blades for perfect front/rear end trimming on all types of edges
Operating cycle controlled by PLC HF motor 200 Hz – 12.000 rpm – 0.22 kW
Integrated suction system
Flush Trimming units
NO ADJUSTMENTS
The system “reads” the edge thickness, making mistakes impossible!
Rapid changeovers working between radius milling, thin and solid edges.
2 HF motors 200 Hz – 12,000 rpm – 0.37 kW
Buffing unit
BRIGHT AND SHINY EDGES
Uniform colouring and finishing even on processed edges
2 motors for buffing unit diameter 120 mm rotating at 1.400 rpm
Corner Rounding unit
PERFECT FINISHING
Finishing of front and rear corners on straight, bevelled and postformed panels
Possibility to select from PLC the processed front, rear or complete panel
Chain panel feeding
THE DEFINITIVE SOLUTION FOR INDUSTRIAL QUALITY EDGEBANDING
Firm grip of panel guaranteed by special non-slip rubber on the pads.
Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre.
Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre.
“Nesting” copiers
SPECIAL OPERATIONS
Permits to apply edges on panels with cavities to hold hardware (also allows to apply edges on acute angle panels).
Both upper and lower copiers are fitted with 3 bearings which guarantee 3 support points for perfect copying in each situation.
Edge Scraping unit
Blowers for detachment and removal of shavings
Dust extraction system complete with box to separate and collect edge scraping shavings
Glue Scraping unit
REMOVAL OF EXCESS GLUE
Copier discs with automatic cleaning system
Two separate knobs permit rapid exclusion of the unit and easy tool adjustment
Infrared lamp
TO GUARANTEE THE BEST GLUEING CONDITIONS
Creates the best conditions for perfect glueing
Heats panels and removes all traces of dampness
Specifications:-
Min./max. panel height min. 8 – max. 50 mm
Min./max. edge thickness 0.4 – 3 mm (coils) / 0.4 – 3 mm (strips)
Panel width min. 95 mm
Panel length min. 110 mm
Panel feed speed 9 m/min
Glue pot heating element 1315 W – 6 cartridges
End trimming motor 200 Hz – 12.000 rpm – 0.22 kW
Flush trimming motors (each) 200 Hz – 12.000 rpm – 0.37 kW
Total power installed 5 kW approx.
Weight 525 Kg approx.