Hydrapower - Explorer 500
Recommended Base (Minimum)- 4 x 6 Truck with 24 t GVM bogie drive with diff-lock and cross lock
Rig Engine- 6 cylinder Cummins CPAK-6BTA turbo after cooled with 176 hp at 2500 rpm
Rig Hydraulics-* Sauer Danfoss porportionally controlled control valves
*Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions
Rotary Drive:
*Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head lock and swing
*Two Speed, 0 - 225 rpm & 0 - 966 rpm
*Low speed torque to 4150 Nm, high speed torque to 966 Nm
Head Travel- 6.8 m
Main Winch
*Maximum pull is 4200 kg
*Maximum line speed is 28 m/min
Wireline Winch:
*(1) One of in standard configuration
*Maximum pull is 780 kg
*Maximum line speed is 83 m/min
Pulldown:
*Electrically controlled with dial for speed control
*Pull down capacity is 7000 kg
*Pull out capacity is 11 500 kg
Mast:
*Fitted with 2.0 m mast dump for angle drilling
*Standard length is 10 m, supplied with hydraulically operated breakout spanner and top pulley swivel
*Supplied with hydraulic circuti with quick-connect couplings for optional breakout table
Brakeout Table- Optional split type table
Rod/Auger Guard- Optional, can be fitted with hydraulic lockout on head rotation
Rig Body- Supplied with operator's platform and offsider's platform, (4) four stabilizer legs with burst valve protection and fuel tank. Rig body and mast painted in Hydrapower Red and Black
Toolkit- Flags for rear of mast, mast lock plates, parts and maintenance manual for rig and engine, and hydraulic pump test point pressure gauges.
******5100
