The FabricPro is a reliable and robust automated spreading solution for fabric rolls weighing up to 100 kg (220 lbs). Spread without tension and with perfect edge alignment. Combines well with the Pathfinder fabric cutting machine.
User Interface
• Large colour touchscreen
• Simplified graphical display that is easy to learn
• Stores unlimited fabric set-up files for quick retrieval to accelerate future spreading jobs
• Virtual throttle enables full control
• Dynamic digital speed control of all movements with a single slider
Safety
• LiDar multi-zone detection – slow down when objects or persons are detected in near proximity, and stop when in close proximity.
• Eliminate operator injury caused by lifting heavy rolls with a patented cradle enabling loading at table height.
• Automatic knife sharpening – the frequency of sharpening is adjusted automatiy by fabric type within pre-set parameters. Operators do not need to place their fingers near the knife system to activate the sharpener.
Elevator
• Uniquely maintains a fixed angle – this guarantees the same fabric tension as the elevator raises
• Automatic calculation of changing fabric start edge synchronised with elevator height
• Automatic elevator height position calculated by ply height
Cradle (Patented)
• The cradle lowers to table height enabling heavy rolls to be loaded easily
• Feather-light dancer bar minimising tension – even difficult fabrics
• A fully enclosed endless belt eliminates jammed threads, often found in typical cradles
System Features
• Electronic edge control
• Integrated safety stop system
• Automatic knife sharpening
• Automatic spread programming from ‘job file’
• Automatic spread programming from ‘cut file’
• Splicing – Automatic Splice position calculation and restart
‘Out Of Fabric’ detection
• Automatic elevator height positioning
• Ply counter
• Automatic Fabric Inspection Lightbox
• Programmable end allowance settings
• Spreading configurations – ‘Face-to-Face’, ‘Face-up’ & ‘Face-to-Face with end cut’
**BUYER MUST DISASSEMBLE & REMOVE**