The Falc Master Super Verge Mower is a heavy-duty solution for professional vegetation management, built to tackle dense grass, prunings, and small branches up to 70mm in diameter with ease. Ideal for embankments, canals, ditches, orchards, olive and citrus groves, and road verges, it delivers a clean, consistent finish while offering the reach and flexibility needed for demanding applications.
? Rear, 3pt linkage, clevis mounted; Cat 2.
? Left hand offset. (Right hand offset is available on request).
? 150hp gearbox fitted with an internal free wheeling clutch.
? 540 rpm PTO (1000 rpm PTO optional).
? Drive shaft with double constant velocity joint & 1 3/8” 6 spline yoke.
? Side drive: 4 x SPB ‘V’ belts.
? 4mm body plate with 2.5mm wear and tear sheet.
? Tractor requires dual hydraulic remote couplings.
? Hydraulic adjustment of both tilt and offset.
? Openable rear access door.
? Height control via Rear Roller, braced by a rigid steel bar.
? Rear roller tube: ? 168mm x 5mm.
? Forward positioned rear roller for better material discharge.
? Rotor tube: ? 193.7mm x 8mm & dynamically balanced.
? Rotor & Rear Roller bearing housings fabricated from machined steel .
? Mechanical break-back device with automatic re-set for protection when an obstacle is encountered.
? Pivot points fitted with self-lubricating bushes.
? Headstock dimensions: 120 x 80 x 10mm on the 1600; 120 x 120 x 10mm on 1800 & 2100.
? Hammer flails secured with 25mm diameter pins.
? Operating angles from 60 degrees down to 90 degrees up.
? Minimum tractor weights: 3000kgs (1600); 3500kgs (1800) & 4000kgs (2100)
? Minimum tractor wheel track: 1.8m (1600); 2.0m (1800) & 2.1m (2100)
? Full CE safety guarding.
N.B. Price is for Master Super 1800 LH only. Pricing and specifications subject to change without notice. Dealer delivery chargers apply. E&OE
Facebook
Twitter
Email a Friend
FOUNTAINDALE, NSW 
Print
******8076 
