The FEMAC T9 FS105 REV Hydraulic Flail Mower/Mulcher is a high quality, Italian built, flail mower attachment with a 1050mm cutting length for excavators from 6.0 - 12.0 tonne. This unit is suitable for drainage work, land clearance and heavy duty mulching.
This mulcher comes with 360 rotating hammers, capable of mulching up to 120mm diameter branches. The flail mower attachment unit utilises a 2 belt drive system for high transmission of power from the motor to the rotor.
The REV stands for reversible and the unit can be swept back and forth continuously cutting without lifting of the ground.
The 360 degree rotating hammers extend the life of the teeth, and produce a higher velocity than swinging hammers, giving this attachment an impressive maximum cutting diameter.
This unit comes ready to use, including a hitch, hydraulic hoses and couplings.
Made in Italy by FEMAC Slr.
Specifications
1050mm cutting width
40-100L/min oil flow required
360 degree spinning 'FS' Hammer teeth
Triple high-performance toothed V-belt transmission
Internally reinforced double-case body with interspace
Protective shield for belts and drive components
Symmetric shearing head, for a faster cut with the rotation of the excavator
Symmetrical Input and output mouths
Adjustable hoods, fully openable for higher cutting capacity
Side skids adjustable on 3 positions to change the height of the cut
Inside Rotor Supports with ”labyrinth” for the protection of the bearings from the impurities
Double Row spherical adjustable bearings of 1st quality
Valves block complete with priority valve for adjusting oil flow, anti-shock valve (pressure relief valve), anti-cavitation
Optional case drain
Casappa cast iron gear motor
Chain curtains for debris control
Facebook
Twitter
Email a Friend
NSW, QLD, VIC - Delivers Nationally 
Print
******0835 
