The HVZ-UNI-II-EK installation clamp requires only one hydraulic control circuit on the side of the carrier for automatic installation of interlocking paving stones. It is therefore ideally suited for attachment to smaller carrier, such as Knick- and Rollmops as well as small wheeled loaders.
All the properties of the HVZ-UNI-II (other than shifting layers into stretcher bond) are also integrated into the HVZ-UNI-II-EK.
Fitted onto a paving installation machine, the simplified automatic programme sequence allows even inexperienced drivers to achieve good laying performance very quickly.
The single-circuit control is started/stopped simply using the intersection control lever or electric joystick on the paving installation machine.
Safe gripping function dependent upon the condition of the spacers and the quality of the stones. Specification net weight without hydraulic rotator and swing damper.
Further information
Durable surface protection by galvanizing.
For further information see HVZ-UNI-II.
Technical details
Working Load Limit/WLL (kg): 400
Weight Dead Weight (kg): 275
Hydraulic Connection Pressure (bar): 170-320
Hydr. Volumetric Flow (l/min): 15-75
Hydr. Backflow Pressure , max (bar): 20
Opening Width Main Gripper (mm): 580-1260
Opening Width Side Gripper (mm): 960-1440
Length of Gripper (mm): 1200
Inside Height (mm): 70
Height Stone/Element (mm): 50-160