Used James Taylor CLASSIC Line rotary clamp carrier.
3600mm width x 1100mm clamps
12 Sections
(Please note : Auto panel flattener is non operational on this unit)
The Classic Semi-Automatic Clamp Carrier is Taylors most versatile model. Sizes range from 6 to 60 sections with widths from 8-1/2’ (2.5 M) to 20-1/2’ (6.0 M). A wide range of products from small panels to large laminations can be glued. Most machines are equipped with pneumatic or hydraulic components for operation:
• A motor drive for rotation of the
sections.
• A Clamp Tightener for uniform
clamping pressure.
• A Panel Flattener for flat
components.
And a variety of other accessories for glue application, etc. As with all Taylor machines, smaller machines can be expanded as production requirements grow. This feature is unique to the industry and permits the most efficient use of investment money.
Operation
The operation is simple using one or two
operators.
1) Glue is applied with a manual or conveyorized Glue Applicator.
2) The operator places the material into the clamps.
3) The Clamp Tightener is manual and Panel Flattener are used to tighten the Clamps and flatten the material to be glued.
4) When all the clamps are tight, a foot valve is used to activate the Motor Drive to rotate the machine to the next section.
5) The Clamp Tightener is used to loosen all the clamps, and the cured panels or laminations are removed.
6) The loading procedure then begins again.