Used Toku TNB-6E Excavator Hydraulic Hammer Rock Breaker to suit: 5-11 ton machine.
Great for loosening and breaking up rock, rocky ground, concrete, tarmac, paved areas, demolition etc.
Striking Rate: 550~1000 BPM (Blows/Min).
Hydraulic Flow: 45-80 L/min.
Operating Pressure: 10-16 MPa (1450-2321 PSI).
Tool (Moil) Diameter: 95mm.
Gas Pressure: 0.8 MPa (116 PSI).
Made in Japan by Toku.
Please Note!
There are 2 bolts missing on the Headstock (see pic# 3) and 6/8 bolts missing from the box on top (see pic# 8).
The Headstock is currently fitted with 60mm pins, but could be setup for 50mm pins if you have the existing pins milled down in the midde to 50mm in a lathe, or fit 50mm pins into collar bosses that fit into the 60mm holes in the ear plates.
*** Current Headstock configuration:
60mm Pin Diameter, 300mm Pin Center to Pin Center (CtoC), 205mm Between the inside Ear Bosses (which can be shaved back up to 237mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
Should fit: Hanix H50B-2 / H75B-2, Kubota KX 80-3 / KX251, SMC MX80.
Maybe fit: Liebherr R308 / R310, Volvo ECR88C / ECR88 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
*** Setup for 50mm pins, then would suit the following machines:
Should fit: Case 9007 / 9007B / CX 75SR / CX 80SR, Caterpillar 308D / 308e2cr, JCB JS 70 / JZ 70, Kato 180G, Kobelco 80CS, Komatsu WB146-5,PS-5, Link-Belt 75SA (Mono & Offset) / 80SA / 1600 QUANTUM, New Holland EH 70 / EH 80 CS, Sumitomo LS 1600F2U / SH 60 / SH 60-2 / SH 60DX-2 / SH 60SP / SH 60SR / SH 60X-2 / SH 75U / SH 75U-2 / SH 75UU / SH 75X-2 / SH 75X-3, Sunward SWE 75, Takeuchi TB 70 / TB 70FR / TB 80FR / TB 175.
Maybe fit: Bobcat 442 / X442 / zx125, Hitachi EX60-5 / EX60-5 Import / EX75-5 / EX80 Import, Hitachi Zaxis 75US / 80, Ingersoll-Rand ZX125, John Deere 75C / 80C, Kato 140, Kobelco 70SR / SK 60 / SK 70SR / SK 70SR-1E / SK 75UR / SK 80MSR, Komatsu PC 60 / PC 60-5 / PC 60-6 / PC 60-7 / PC 70FR / PC 75UU / PC 75UU-1 / PC 75UU-2 / PC 75UU-3 / PC 78MR-6 / PC 80-1 / PC 80-2 / PC 80-3 / PC 90-1 / PC 95R-2 / SV100, Sany SY 75C, Schaeff HR31 / HR32, Terex HR32, Yanmar B 7 / B 7 SIGMA, Yanmar VIO70 / VIO75 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
Breaker Dimensions (with moil): 1830mm(L) x 380mm(W) x 570mm(H), Weight: 496kgs.
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.