Also suitable for manhole rings (DIN 4034 Part 1 and 2) due to its extra-deep claws and rubber supports.
Adjusted to the dimensions of the manhole ring by bolts. As only the side wall is gripped, no radial pressure is exerted. Making it suitable for handling green products.
Further information
Fully mechanical operation, so it can be used with any lifting equipment.
Crane eye for attaching to crane hook.
Fully automatic change-over from “full” to “empty”.
Technical details
Working Load Limit/WLL (kg): 2000
Weight Dead Weight (kg): 170
Gripping Range (mm): 80-160
Diameter Nominal Diameter (mm): 800-1500
Number of Claws (Pcs.): 2
Accessories
ET-RK with cross link: Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.
ET-RK swivel hook: Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.
ET with cross link: Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted above the gripper including lifting eye for attaching to crane hook. ET 90° design with manual turning device which arrests itself every 90°.
ET 90° incl. cross link: Fork sleeve for fork lift peaks. Suitable e.g. for RK and AKZ-UNI, mounted above the gripper including lifting eye for attaching to crane hook. ET 90° design with manual turning device which arrests itself every 90°.
ET with cross link USA: Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted above the gripper including lifting eye for attaching to crane hook. ET 90° design with manual turning device which arrests itself every 90°.