This machine is a Multicam flatbed router chassis, linear guides, motors, drives and gantry. It has no CNC motion controller or router fitted but does have a new control box, power supply, 3 axis drives and new robotic cabling and echain. The motors are fitted to rack and pinion gears. The motion has been tested with this setup but the machine is being sold without a motion controller.
This machine would be ideal for someone who wanted to put a CNC motion controller and joystick pendant from Masso or other supplier with custom tooling on the Y axis carriage to make a low-cost CNC router or other specialised machine without the bother of building the frame and drive system.
The bed size is approximately 1500 x 3600 and has about 250mm between the gantry and cutting surface. The chassis supporting the cutting surface and guide rails is welded steel tube so the machine can be easily forked onto a flatbed truck for transport at the buyer's expense.