New Excavator Ripper, suit 4-8 Ton machine.
Designed for Caterpillar 307 / 308 / E 70B, Daewoo Solar 070-3 / 080-3 / 080W-3, Hitachi EX60 / EX60-3 / EX60-5 UK Version, Volvo BL70 / BL71 / BL71B etc. but will fit other machines (see below list of machines we have found so far).
Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc.
This is a strong, well engineered & reinforced Ripper with a solid 50mm thick shank, made by the Californian Company: SEC Bucket.
It is much taller and heavier than most other 45mm pin Rippers so will be perfect if you need deeper penetration.
It is New & Unused but has some paint scuffs & chips from warehouse storage & handling.
***** Current Headstock configuration:
* 45mm Pin Diameter
* 305mm Pin Center to Pin Center (CtoC)
* 188mm Between the inside Ear Bosses (which can be shaved back up to 230mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
*
* Should fit: Caterpillar 307 / 308 / E 70B, Daewoo Solar 070-3 / 080-3 / 080W-3, Hitachi EX60 / EX60-3 / EX60-5 UK Version, Volvo BL70 / BL71 / BL71B.
*
* Maybe fit: Daewoo Solar 070 / 075-V, Doosan S 75-V, Ferguson MF 760 / MF 860, Fermac 760 / 860, Hyundai R 55-7, Komatsu WB 93-2, Samsung SE 50-3, Volvo EC50/W / EC55 / EC55B / ECR58 / MX 55/W / Volvo SE 50-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
Dimensions (laying down as in pics# 6-10): 1100mm long, 388mm wide, 650mm high. Weight: 156kg.
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.
Facebook
Twitter
Email a Friend
PULLENVALE, QLD 
Print
******6470 
