New 5-10 ton (50mm pin) Excavator Ripper suit Case, Cat, Hitachi, Komatsu, Sumitomo etc.

New SDCH Excavator Ripper, suit 5-10 Ton machines.

Great for ripping up tree roots, breaking up rock and loosening rocky ground, tarmac, paved areas etc.

This is a strong, well engineered & reinforced Ripper with a solid 50mm thick shank and an extra Wear Shield (in black) welded around the shank making that section 75mm thick.

There is also a front lifting hook.


***** Headstock Dimensions:
* The Pin Diameter is 50mm but they are fitted into collar bosses that fit into 65mm diameter Pin holes (see pic# 9), so pins up to 65mm diameter can be fitted without needing to bore out the holes in the bucket's headstock.
* The Pin Center to Pin Center (CtoC) is 305mm.
* The distance between the collar bosses is 210mm. Removing the collar bosses, the distance between the headstock bosses is 250mm, but these welded-on-bosses could also be shaved back on the insides to a maximum of 270mm (the distance Between the Ear Plates), if you need more inside width for your hitch or dipper arm to fit into.

Should fit: Case 9007 / 9007B / CX 75SR / CX 80SR, Caterpillar 308D / 308e2cr, Hitachi EX60-5 / EX60-5 Import / EX75-5 / EX80 Import, Hitachi Zaxis 75US / 80, JCB JS 70 / JZ 70, John Deere 75C / 80C, Kato 180G, Kobelco 80CS, Komatsu PC 60 / PC 60-5 / PC 60-6 / PC 60-7 / PC 70FR / PC 75UU / PC 75UU-1 / PC 75UU-2 / PC 75UU-3 / PC 78MR-6 / PC 80-1 / PC 80-2 / PC 80-3 / PC 90-1 / PC 95R-2 / SV100, Link-Belt 75SA (Mono & Offset) / 80SA / 1600 QUANTUM, New Holland EH 70 / EH 80 CS, Sany SY 75C, Sumitomo LS 1600F2U / SH 60 / SH 60-2 / SH 60DX-2 / SH 60SP / SH 60SR / SH 60X-2 / SH 75U / SH 75U-2 / SH 75UU / SH 75X-2 / SH 75X-3, Sunward SWE 75, Yanmar B 7 SIGMA / VIO70 / VIO75.

Maybe fit: Bobcat 442 / X442 / zx125, Ingersoll-Rand ZX125, Kobelco 70SR / SK 60 / SK 70SR / SK 70SR-1E / SK 75UR / SK 80MSR, Komatsu WB146-5,PS-5, Schaeff HR32, Takeuchi TB 70 / TB 70FR / TB 80FR / TB 175, Terex HR32, Yanmar B 7 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Dimensions (standing up as in pics# 1-5): 425mm wide, 475mm deep, 729mm high. Weight: 104kg.
Shipping (laying down as in pics# 6-8): 729mm long, 425mm wide, 475mm high. Weight: 104kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.