The new PLASMA PROF 163 ACCthree-phase "chopper" power source, with a power of 160A at 40%, represents the top model in the Cebora metal plasma cutting power sources and is the evolution of the former models Prof 150 and Prof 152 in comparison to which, thanks to the new CP161 torch, it can cut higher thicknesses (the recommended thickness, for the best cutting quality and productivity, is 40 mm; the maximum thickness is 45 mm and the severance thickness is 50 mm), has a higher piercing thickness (15 mm) and does not need water cooling.
The high continuous (95A at 100%) duty cycle and the cutting speed make the PLASMA PROF 163 ACC ideal for automatic production applications, as well as for manual productions of average size.
• Automatic detection of phase presence (both upon start-up and during operation), to avoid damaging the machine in case the phase is accidentally missing.
• Pilot arc operating mode, which makes it possible to work even on painted or coated metals.
• "Post-gas" function which, by cooling the torch after arc shut-off, reduces stress on the components and extends the life-span of consumables.
• High electromagnetic compatibility, per EN60974-10, allowing the power source to be used in the vicinity of electronic equipment (such as computers, PLC, etc).
• High voltage arc striking with high frequency, to ensure reliable lighting of the pilot arc.
• Central torch adapter with safety protection, to avoid accidental contact with the power parts.
• Explosion-proof protection of the air reducer unit.
• "Pilot self-restart" function selectable from the panel, which interrupts and automatically restarts the arc when cutting nets and grids, increasing operator productivity.
• Gouging mode that can be selected from the front panel
• Display showing the cutting current and the relevant nozzle diameter to be used
• Display of the air pressure and of the relevant correct setting
• Interface kit (optional - art. 108) for connection to CNC
• RS232 port for software updating
• Standard equipped with 6 m CP161 MAR torch
**Complies with EN 61000 - 3 - 12**
******5200
Leumeah, NSW
