This unit was used on the bottom of a silo system and would empty western red cedar shavings into a briquette machine.
The unit has an input diameter of 300 mm and is manufactured from diecast material and is extremely heavy and robust.
Either side of the impeller on the driveshaft are bearing housing with grease nipples for maintenance, and they are then driven through a series of pulleys and V belts which allow you to adjust the speed of the valve, and this is then driven by three-phase motor.
We had it working on the bottom of our silo for over five years, and in all that time, it never jammed or let us down.
This is an extremely heavy duty unit and would be suitable for any material as because the western red cedar shavings were very fine if you can cope with that, can cope with anything.
The top of the unit has a mounting flange with eight fixing points and the unit also includes an off switch, plus cable and plug so you can see the unit operating before purchasing.
I’m happy to provide a video or do a FaceTime or zoom meeting where you can see the unit operating.
We are also happy to crate the unit ready to be shipped if required.