Shark 282 SXI evo, semi-automatic electro-hydraulic band sawing machine, for cutting from -45º right to +60º left.
Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP.
Semi-automatic cycle: Starting the cycle: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.
Semi-automatic dynamic cycle: lowering the head manually, so as to position it just above the material, the semi-automatic cycle starts by pressing trigger switch on handle.
A FEW FEATURES:
-Console with all centralized controls, installed on an articulated arm.
-Low voltage soft keyboard, in polyester, with thermo-shaped buttons, with tactile feeling and sound signal when operating.
-Display for the following messages: · Diagnostic · Allarms (cause description). · -Input and output status. · Cut counting. · Time spent for the cut made. · Blade motor absorption. · Blade tension. · Blade speed. · Numeric displaying of the head position.
-Control handle of the manual cycle at 24 V, IP55.
-Program with several special cutting cycles.
-Latest generation hydraulic control unit, with high efficiency and low energy consumption.
-Wide working surface with rotating table installed on a roller bearing, dia. 265 mm, pre-loaded with thrust bearing.
-Double band rotation speed (36/72 m/min) with card PRESET to mount the electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min).
-The limits of the head stroke are programmed through the control board, depending on the dimensions of the bars to be cut.
-Manually-operated blade tensioning through electronic transducer, with displaying.
-Steel base with removable coolant tray.
-Electric pump for band lubrication and cooling.
-Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditional lubrication with emulsible oil.
-Wire chip brush for band cleaning.
-Machine arranged for handling with movement equipment.
-Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
-Stock support arm with roller predisposed to mount loading table.
-Bi-metal band for solids and sections.
-Service keys and instructions manual for maintenance and spare parts list.
Fully complies to Australian safety standards 4024.1
MONA VALE, NSW
******8555 
