HAFCO WOODMASTER T-20S Thicknesser - Spiral Head Cutter 508 x 200mm (W x H) Material Capacity Includes Spiral Cutter Head with Carbide Inserts
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: W415S
Manufactured in Taiwan
A difference from the traditional design of thicknessers are the new helical cutter heads that's now standard in this model. The important advantage of a spiral cutter head is its shearing contact with the work-piece rather than the very loud chopping effect produced by a traditional HSS blade cutter heads. This translates into a much smoother cut with less chipping and tear out of the work-piece as well as significantly much quieter operation.
The Hafco T-20S thicknesser with "Spiral Cutter Head & Carbide Inserts" is a heavy duty machine with very substantial cast iron body and heavy gauge sheet steel base. The cast iron thicknessing table, which has a polished surface for reduced vibration and improved quality of cut, is supported on solid pillars at each corner and has extension rollers both front and back for improved timber support.
Steel rollers with ribbing ensure positive drive on the timber through the machine at a rate of 16 or 20 fpm via two speed gearbox, the feed roller pressure can be adjusted with the four adjusters on the top of the machine. The depth of cut is set by means of the cranked handle on the side using the setting scale positioned on the in-feed side or digital readout display. Power is provided by a 3750W / 5hp 415V induction motor, housed within the base and transmitting power to the cutter block via a twin pulley vee belt drive system.
Spiral cutter heads have now revolutionised wood work planers and thinckners! Offering reduced chatter and tear-out in most timbers. This head has 4 x spirals and comes pre-loaded with a total of 92 fine grain tungsten carbide inserts, which have four cutting edges that can be indexed to offer a new cutting edge in seconds, and do not require a blade setting jig. The general consensus from end users state that when used correctly the inserts can last anywhere from three to five times longer than any standard HSS knives, so if you multiply this by four cutting edges you can achieve 12 to 20 times the normal blade life of a HSS blade set.
Features:
Heavy cast iron machine suits professional workshop
4 spirals on cutter head with 92 pre-loaded carbide inserts
Carbide inserts incorporate 4 cutting edges for reduced vibration
Dynamically balanced cutting head
Cutting speed 5000 rpm
2 speed feed rollers with pressure adjustment
125mm dust chute
Digital Height Gauge (Includes LR44 battery)
Industrial contactor switch with overload protection
Anti kick back fingers
Left & right table locking dials
Heavy duty four post design with protective concertina covers
Same model sold for over 20 years
Quality Taiwanese Manufacture
Includes:
- Includes 92 Carbide Inserts - Dimension Shown Below.
Specifications:
ORDER CODE: W415S
MODEL: T-20S
Material Width Capacity (mm): 508
Material Height Capacity (mm): 200
Minimum Material Length (mm): 190
Maximum Depth of Cut (mm): 6mm 508mm wide
Cutter Type: Carbide Inserts - Spiral
Quantity of Cutters (No. x Type): 92 x Inserts
Cutter Block Diameter (mm): 80
Cutter Block Speed (rpm): 5000
Quantity of Spirals (No.): 4
Length of Table (mm): 650
Length of Table with Extensions/Rollers (mm): 1470
Feed Speed (m/min): 4.8 / 6
Dust Outlet Diameter (mm): 125
Motor Power (kW / hp): 3.75 / 5
Voltage / Amperage (V / amp): 415
Floor Space (W x D x H) (mm): 1000 x 1470 x 1030
Shipping Dimensions (L x W x H): 750 x 950 x 1100
Nett Weight: 420
To Purchase Online Please Visit The Machineryhouse Website & Search For 'W415S'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Brisbane - 625 Boundary Road, Coopers Plains QLD 4108
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Perth - 41-43 Abernethy Road, Belmont WA 6104
******3976
