TIGER 300SX SEMI-AUTO COLD SAW by MEP Italy Ex-Govt. MACC 350 *Sold*. HAFCO 315mm *Sold*

1). TIGER 300SX by MEP SEMI-AUTO COLD SAW 1.5kw 415v 305mm BLADE, 2-SPEED, HEAD POSITIONING SYSTEM, AIR OVER HYDRAULICS, COMPOUND ANGLE CUTS, VERY HEAVY DUTY Made in Italy, Ex-Government. FRACTION OF REPL COST!
SALE TO 16/12/24 $ 4,450 + GST ($ 4,895 INCLUDING GST). REQUEST EXTRA PHOTOS
The saw can cut from 60° right to 45° left. The cutting head moves vertically on two enclosed linear bearings
The operator programmes top and bottom position and presses the start button. The vice closes, cut commences with pneumatic feed, after the cut the blade stops, vice opens, and head returns to the programmed top position.
The centralised control panel provides information required incl alarms, diagnostics, pieces cut and cutting time
Four-speed gearbox 15,30,45 and 90 RPM
The rotating table means the blade always aligns with slot to provide a stable working area even when cutting small parts
The vice has an anti-burr device with double clamping of the piece
The steel base is standard equipment with slide-out chip tray and coolant pump.
CUTTING RANGES:
0° round 90 mm
0° square 85 x 85 mm
45° round left 90 mm
45° square left 85 x 85 mm
45° flat left 90 x 60 mm
60° round left 60 mm
60° square left 60 x 60 mm
60° flat left 60 x 80 mm
45° round right 90 mm
45° flat right 85 x 85 mm
45° flat right 90 x 60 mm.

2). MACC Model TRS-300 COLD SAW 2-SPEED 2.2Kw 3hp 415v DIRECT DRIVE SUIT ALUMINIUM & METAL, MADE IN ITALY, CAST IRON BASE, HEAVY DUTY, 300mm TUNGSTEN BLADE, COOLANT PUMP, SWIVEL MITRE CUTS, SINGLE-ACTION DOUBLE VICE, , INCLUDING HEAVY DUTY STAND, GOOD CONDITION. REQUIRES COSMETIC TOUCHING UP
SALE TO 16/7/23 $ 1,250 + GST ($ 1,375 INCLUDING GST) ** SOLD 22/7/23 **

3). HAFCO METALMASTER 315mm COLD SAW Model CS-315D 2-Speed 415v MADE IN TAIWAN, COOLANT PUMP/SPRAY, CAST IRON BASE, HEAVY DUTY STAND, EXTRA BLADES, INCLUDING 2.4m INFEED & 3.3m OUTFEED ROLLER TABLES INCLUDING ALUMINIUM FENCE / FLIP-OVER STOP, GOOD CONDITION. HUGE EOFY PRICE REDUCTION!
SALE TO 30/6/23 $ 1,350 + GST ($ 1,485 INCLUDING GST). REQUEST BROCHURE ** SOLD 27/6/23 **

4). MACC Model NEW350 COLD SAW 2-SPEED 2.2Kw 3hp 415v DIRECT DRIVE SUIT ALUMINIUM/METAL, MADE IN ITALY, CAST IRON BASE, H'DUTY, 350mm TUNGSTEN BLADE, COOLANT PUMP & SPRAY, SWIVEL MITRE CUTS, SINGLE-ACTION DOUBLE VICE, GOOD CONDITION. REQUIRES COSMETIC REPAIRS. REFER ATTACHED BROCHURE. BIG PRICE REDUCTION:
SALE TO 31/5/23 $ 950 + GST ($ 1,045 INCLUDING GST) ** SOLD 23/5/23 **


4). HABERLE AL350 2-SPEED ALUMINIUM & METAL MITRE CUT-OFF SAW 350mm TUNGSTEN BLADE, MADE IN GERMANY, CAST IRON BASE, VERY HEAVY DUTY, METAL (Slow Speed) & ALUMINIUM (Fast Speed), 45 Degree SWIVEL, HORIZONTAL CLAMPS (x 2), PROVISION FOR ADD-ON WATER PUMP & SPRAY
SALE TO 14/10/22 - POA ** SOLD 6/10/22 **
** The HABERLE AL 350 is a precision circular mitre saw for tubes, sections and solid bars made of aluminium, non-ferrous metals and plastic.
The AL 350 is fast incl 2 x speeds of 1,400 / 2,800 r.p.m. and is suitable for diameters up to 120 mm for precision angle cuts **