TORO TRAXMASTER TX525 (22323/22324)

Leave others in your Tracks
Narrow or Wide option
Impressive Hydraulic Power

The Toro TX Compact Utility Loader is tough, rugged and a hard working machine. It is compact and versatile enough to get hydraulic power into places only previously accessible by bare hands, eliminating back breaking labour forever. Accomplish more work in less time, using less manpower! It delivers optimal power for tough digging, deep trenching and unforgiving terrain.


25 HP Kubota® diesel engine
Track width 15 cm (N) / 24.1 cm (W)
23 litre fuel tank
Double Kevlar® reinforced tracks for extended life
Operational platform allows ride-on capability (optional)
46.6 lpm at 3,200 rpm auxiliary hydraulic flow
Two-stage, heavy-duty, remote air cleaner


Model # 22323 Narrow (N)

22324 Wide (W)

Engine 25hp Kubota Diesel

Power Output Torque

14.4 kW (23.3 hp) at 3400 rpm

57.4 Nm (42.3 ft-lbs) at 2600 rpm

3400 rpm high idle

Track

The tracks are Kevlar reinforced, endless robber rings with 28 internal drive lugs. The outer tread on the tracks is a turf-friendly 5-shaped pattern with pitched cross cuts.

Track Width

14.9 cm – 5.88 inches (N)

24.1 cm – 9.5 inches (W)

Track Pitch

8.8 cm (3.45 inches)

Fuel Tank

The fuel tank is a cross-link polyethylene rotational moulding with a top draw fuel outlet and a vented fuel cap

Fuel Tank Capacity

22.7 litres



Battery

A 12 volt, BCI group 55 battery with 585 CCA powers the electrical system

Electrical Interlocks

Relays and switches are installed on the machine to ensure the following requirements:

-To start the machine, the auxiliary hydraulic valve must be in neutral

-To start the machine, the traction control must be in neutral

Hydraulic Pump

A two-section tandem gear pump, coupled to the engine powers the loader and auxiliary hydraulic systems

Engine Control

All engine controls are panel mounted, including the ignition, throttle and glow plugs

Auxiliary

The auxiliary hydraulic flow to TX attachments is controlled by the auxiliary valve lever

Wheelbase

79.0 cm

Ground Speeds

Forward: 0-7.2 km/h (0-4.5 mph)

Reverse: 0-3.2 km/h (0-2 mph)

Ground Pressure

Narrow: 34.5 kPa (5 psi) – traction unit weight only

Wide: 24.1 kPa (3.5 psi) – traction unit weight only

Ground Clearance

11.7 cm

Dimensions

Length: 233.7 cm w/ bucket 180 cm w/o bucket

Width: 85.6 cm (N) 104.0 cm (W)

Height: 117.1 cm

Hinge Pin Height

167.1 cm

Dump Height

117.1 cm

Dump Angle

38°

Reach

55.4 cm fully raised

Maximum Operating

Height

229.0 cm

Tip Capacity

716.7 kg (1,580 lb) – per SAE J732

SAE J818 Rating 50%

Tip Capacity

360 kg (793 lb)

SAE J818 Rating 35%

Tip Capacity

250.8 kg (553 lb)

Weight

Narrow: 863.6 kg (1,904 lbs) – traction unit only

918 kg (2,024 lbs) – with TX bucket

Wide: 913.1 kg (2,013lbs) – traction unit only

967.5 kg (2,133 lbs) – with TX bucket

Warranty

Standard warranty period of 2 years or 1000 hours limited warranty