TRUMPF TruBend Series 5000

The Press Brake Jack-of-all-Trades

Combining innovative technology with precision machining, the TruBend Series 5000 is Trumpf’s most successful and versatile bending machine worldwide. It allows you to select from a wide range of machining options to tailor it to your needs. Offering the widest range of parts in its class. Innovative features such as the lower tool displacement and 6-axis backgauge provide you with complete production freedom. The TruBend Series 5000 offers user-friendly and ergonomic design, and numerous equipment options make production more enjoyable, safer and more productive.

Key Features
Dynamic axis positioning
Automatically controlled bending for precise angles from the very first part
Up to six CNC controlled backstop axes for added flexibility
Quick beam and back gauge fingers for series production
Up to 320 ton pressing force
Up to 4250mm bending length

Bending processes and methods
Most bending parts are produced using air bending, bottom bending, or folding and hemming. These methods and processes all work in the same way: A punch presses the workpiece into the lower tool of the die. That is why the bending machines which carry out these methods and processes are called press brakes. Alongside press brakes, TRUMPF also supplies panel benders.

Air bending
With air bending, the punch presses the workpiece into the die without pressing it against the walls. While the punch moves down, the sides of the workpiece bend up, which creates the angle. The deeper the punch presses the workpiece into the die, the more acute the angle. A clearance remains between the punch and the die. Air bending is referred to as a path-dependent method, as each angle requires a defined path. The machine control calculates this path as well as the appropriate press force. The path and press force depend on the tools as well as the material and product properties (angle, length).

Bottom bending
In bottom bending, the punch presses the workpiece into the die completely so that there is no clearance between the die, workpiece, and punch. This is called a form lock. The punch and die must fit into each other exactly. For this reason, a separate tool set is required for each angle and each form. When the workpiece has been completely pressed in, the punch cannot move further down. However, the machine control increases the press force until the predefined value has been reached. This increases the pressure on the workpiece, which then takes on the shape of the punch and the die. The angle stabilizes under the high pressure so that springback is almost completely eliminated.

Folding and hemming
Sheet edges are often bent over completely, such as the edges of boxes. The sides are then parallel to each other. This either makes the finished part more stable or creates edge protection. Furthermore, folds are often needed so that another part can be hooked into them at a later stage. Folding and hemming occurs in two steps. In the first step, the operator pre-bends an angle of 30°. Then they reinsert the workpiece and press the angle shut. The procedure is called folding if a gap remains between the sides. With hemming, the sides are pressed completely together. Folding is path-dependent, but hemming is force-dependent.Panel bending
The bending frame in the machines comprises a C profile onto which the lower and upper bending tool are mounted. When the sheet metal is bent, the C profile moves up or down and performs a small elliptical movement (the swivel). Panel benders are semi-automatic and are characterized by their speed and flexibility, in particular when handling small quantities. Panel bending can also be used to productively bend different radii sizes on a component using the same tool.