UNDER CONVEYOR DEBRIS SCRAPERS

Under cutter / Debris Scraper is used to clean debris out from areas where a loader is unable to reach for example under conveyors or in chook sheds with a minimum clearance of around 250mm.
•
The main frame can be side shifted to one side to increase the reach of the Scraper.
•
SSU1800 is fitted with a hydraulic actuator for changing the position of the boom through a 180 degree angle to the machine.
•
A robust hydraulic motor drives the chain via a drive shaft. This design reduces wear parts (eg. gearboxes), requires no on-going servicing, and achieves high start-up torque.
•
Nylon wear pads support the centre of the chain to stop sagging.

UNDERCUTTER / DEBRIS SCRAPER SSU1800 UNDERCUTTER

Recommended Host Machine
Skid Steer (Wheeled &Tracked) Loader

Boom Slew Angle
180°

Boom Slew Mechanics
Hydraulic

Maximum Reach
2800mm

Paddle Width
350mm

Minimum Boom Clearance
250mm

Paddle Composition
Steel

Number of Paddles
28

Hydraulic Flow Required
40–80lpm