REDMOND GARY 8 Tonne Cable Drum Stand These robust hot dip galvanized cable drum stands are designed to be placed on the ground or on the back of a tray-back truck and are provided with container lock mounting points. All spindle hardware is zinc plated and gold passivated, the hydraulic disk brake is manufactured from stainless steel and the power pack enclosure is powdercoated. They are also provided with lifting lugs, one on each corner. In addition to this, there are lifting points provided on each end of the spindle assembly for lifting the drum and spindle out of the stand. The....
1ton cable drum trailer hydralic self loader optional carry tray....
Split drums are two piece steel construction with two cones bolted together. They are provided with a series of slots and guides making it possible to install tie straps prior to filling the drum with cable. Tie straps a....
The Welded WE range of Neumann Cable Drum Stands are designed to support cable drums from 1.5 to 6 tonne drum capacities. Technical Data Type Welded Maximum Capacity 4000 kg Maximum Drum Width 1500 mm Maximum Drum Diamet....
8-Tonne, 10-Tonne, 14-Tonne Drum Stand Mounted on Trailer Trailers can carry a maximum weight of 20,000kg. They can accommodate either 8-Tonne, 10-Tonne, 14-Tonne Drum Stands. The Drum Stands can be provided with most of....
The spindles are locked in place with the aid of pins and each spindle is provided with lifting lugs at each end. All spindle hardware is zinc plated and gold passivated. All drum stands are provided with stainless steel....
Cable reel trailer Hydraulic self load and discharge....
REDMOND GARY 6.0 Tonne Self Loading Cable Drum Trailer Redmond Gary 6 Tonne Self Loading Cable Drum Trailer in accordance with the unit indicated on our . The trailer will be supplied with water-cooled diesel engine and ....
The Mutli Purpose Reeler has been designed for the safe and efficient handling and transport of conveyor belt, electrical and steel cables. The belt cable is picked up rather than being pulled or dragged minimising chanc....
Tare Weight 1500kg Gross Weight 3500kg Length 3276mm Width 1035mm Height 1281mm SWL 2000kg Alfabs Engineering stands as a premier fabricator specializing in heavy structural steel and detailed pipe ductwork. Our dedicate....
3ton self loader , 10KN rewind , 4650 KGS atm , 3 tow eye coupling , air Scam Brakes , 12hp Kohler command petrol engine ex ETSA s.a.....
Available for sale or rent. This straightforward but sturdy reeler is perfect for a variety of applications and can handle a wide range of hose types, lengths, and pressures. Pneumatic cable spooler, 110PSI, Reduction dr....
6.5 ton hydraulic self loading cable drum trailer , ex local gov NSW front hydraulic jacking leg , rear stabelising legs, powered by a 13hp Honda petrol engine , fitted with drum drive 3 tow eye type coupling , previous ....
This cable drum stand has a maximum spindle capacity of 1,000kg. It suits cable drums core size 46mm, maximum drum width of 900mm and a maximum drum diameter of 1,300mm. The 1,000kg cable drum stand can be fully disassem....
Galvenised 4.3 ton cable drum trailer , hydraulic self loader , Kubota diesel engine driven , air brakes , 3 toe coupling , carry drums of 3 ton , trailer GVM 4.300 Kgs , Tare 1.300 Kgs , carry 3,000 Kgs drums drum dimen....
The Bolt Together BT range of Neumann Cable Drum Stands are designed to support cable drums from 1.5 to 6 tonne drum capacities. Technical Data Type Bolted Maximum Capacity 4000 kg Maximum Drum Width 1500 mm Maximum Drum Diameter 2600 mm Comes Flat packed Refer to attached brochure for additional detailed information. ....
1.5ton hyd self loader , with cable drum rewind , 2.7 ton ATM, 70 hours powered by a 2cyl Kubota diesel engine , hydraulic front jocky leg , rear hyd stableiser legs , air brakes replacement cost of 60,000 gst from RG , ....
1 ton rogers hydraulic self loading cable drum trailer , 1,200mm dia x 1.200mm wide drums good for NBN work or electrical cable installation , ....