MEP SHARK 281 SXI EVO Semi Automatic Bandsaw

SHARK 281 SXI evo, semi-automatic, electro-hydraulic band sawing machine for cutting from 0º to 60º left.

Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP.

OPERATION: starting the cycle by means of the relative push-button, the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

Standard machine with operation in semi-automatic cycle only, that can be ordered with additional cutting cycles upon request: manual and semi-automatic dynamic cycle (semi-automatic dynamic cycle: lowering the head manually, so as to position it just above the material, the semi-automatic cycle starts by pressing trigger switch on handle).

A FEW FEATURES:
-Console with all centralized controls, installed on an articulated arm.
-Low voltage soft keyboard, in polyester, with thermo-shaped buttons, with tactile -feeling and sound signal when operating.
-Display for the following messages: + Diagnostic (messages in the use language). + -Alarms (cause description). + Input and output status. + Cut counting. + Time spent for the cut made. + Blade motor absorption + Blade tension. + Blade speed. + Numeric displaying of the head position.- Program with several special cutting cycles.
-Latest generation hydraulic control unit, with high efficiency and low energy consumption.
-Double band rotation speed (36/72 m/min) with possibility of ordering the sawing machine with electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min).
-The limits of the head stroke are programmed through the console, depending on the dimensions of the bars to be cut.
-Manually-operated blade tensioning through electronic transducer, with displaying.
-Steel base with removable coolant tank.
-Electric pump for band lubrication and cooling.
-Preset to be equipped with the spray mist system (OPTIONAL), other than with the standard-delivered traditional lubrication with emulsible oil.
-Wire chip brush for band cleaning.
-Machine arranged for handling with movement equipment.
-Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
-Stock support arm with roller predisposed to mount loading table.
-Bi-metal band for solids and sections.
-Service keys and instructions manual for maintenance and spare parts list.

Fully complies to Australian safety standards 4024.1