Connect and disconnect your rear axle easily with the "Switch" button on the dashboard. The MC-X 18-4 will then allow you to reach 25 km/h in two-wheel drive or to handle your loads on all terrains in four-wheel drive. Its 30cm ground clearance optimizes the passage from the road to your crops. In buggy version and equipped with a free lift triplex mast, the MC-X 18-4 will be able to move in cramped places thanks to its overall height of less than 2 meters. This Manitou all-terrain forklift truck with a capacity of 1800 kg will offer you comfort, versatility and safety.
Technical characteristics -
Manufacturer:
Manitou
Model Name:
MC-X_18-4
Power source:
Diesel
Operator type:
Sitting
Max. capacity:
1800 kg
Load center of gravity:
500 mm
Load distance, centre of drive axle to fork:
616 mm
Wheelbase:
1900 mm
Weight -
Service weight
3562 kg
Weight - on front axle (laden) / rear axle (laden)
4237 kg / 1125 kg
Weight - on front axle (Unladen) / rear axle (Unladen)
1662 kg / 1900 kg
Wheels
Tyres type
Pneumatic
Dimensions of front wheels
12,5/80-18/12 SL R4
Dimensions of rear wheels
27x10-12 SKS
Number of front wheels / rear wheels
2 / 2
Number of drive wheels
4
Front wheel gauge
1159 mm
Rear wheel gauge
1176 mm
Dimensions
Height of overhead guard (cabin) / Overall height of low overhead guard (Buggie version)
2155 mm / 1990 mm
Seat height/stand height
1094 mm
Overall length
4100 mm
Length to face of forks
2950 mm
Overall width
1450 mm
Forks section x width x length
35 mm x 100 mm / 1150 mm
Fork carriage ISO 2328 (class/form) A/B
2A
Fork carriage width
1260 mm
Ground clearance below mast
300 mm
Ground clearance at centre of wheelbase
310 mm
Turning radius
3370 mm
Performances -
Travel speed (laden / unladen)
12 km/h / 24.90 km/h
Lifting speed (laden / unladen)
0.40 m/s / 0.40 m/s
Lowering speed (laden / unladen)
0.40 m/s / 0.40 m/s
Drawbar pull (Laden / Unladen)
1985 daN / 1950 daN
Gradeability (laden / unladen)
37 % / 65 %
Service brake
Hydraulic brakes by loss of pressure
Engine
Engine brand / model
Kubota / V1505
Engine power according to ISO 1585
27 kW
Rated speed
3000 rpm
Number of cylinders / Capacity of cylinders
4 - 1498 cm³
Miscellaneous -
Type of drive control
Cable
Working hydraulic pressure for attachments
180 bar
Oil flow rate for attachments
37 l/min
Sound level at the driver's ear according to DIN 12 053
79 dB