The MI-X 30 G is a heat engine-powered masted forklift designed for intense industrial application both indoors and outdoors, sure to please both forklift operators and fleet managers with its innovative design. Adjustable and accessible controls, optimal visibility and security systems are just the starting point, with ease of maintenance, robustness and reliability included as standard issue as well.The inching pedal feature provides a smooth and precise approach during manoeuvres, for comfort and flexibility on a daily basis, whilst access to the driver's position is made easier by the low footstep, doors on both sides and a large, sturdy handle grip on the left side.
Technical characteristics -
Manufacturer:
MANITOU
Model Name:
MI-X 30 G
Power source:
Lpg
Operator type:
Sitting
Max. capacity:
3000 kg
Load center of gravity:
500 mm
Load distance, centre of drive axle to fork:
480 mm
Wheelbase:
1700 mm
Weight -
Service weight
4490 kg
Weight - on front axle (laden) / rear axle (laden)
6560 kg / 930 kg
Weight - on front axle (Unladen) / rear axle (Unladen)
1805 kg / 2685 kg
Wheels
Tyres type
Inflatable
Dimensions of front wheels
12
Dimensions of rear wheels
6.
Number of front wheels / rear wheels
2 / 2
Number of drive wheels
2
Front wheel gauge
1005 mm
Rear wheel gauge
975 mm
Dimensions
Height of overhead guard (cabin)
2130 mm
Seat height/stand height
1215 mm
Height of towing bar (coupling height)
355 mm
Overall length
3865 mm
Length to face of forks
2715 mm
Overall width
1225 mm
Overall width - Single wheels
1225 mm
Forks section / width / length
45 mm x 122 mm x 1150 mm
Fork carriage ISO 2328 (class/form) A/B
3A
Fork carriage width
1100 mm
Ground clearance below mast
130 mm
Ground clearance at centre of wheelbase
200 mm
Aisle Width for pallets 1000 x 1200 crossways
4140 mm
Aisle width for 800 x 1200 pallet lengthways
4340 mm
Turning radius
2460 mm
Internal turning radius (over tyres)
160 mm
Performances -
Travel speed (laden / unladen)
18 km/h-18.50 km/h
Lifting speed (laden / unladen)
0.45 m/s-0.55 m/s
Lowering speed (laden / unladen)
0.48 m/s-0.50 m/s
Drawbar pull (Laden / Unladen)
1740 daN / 1080 daN
Gradeability (laden / unladen)
20 % / 20 %
Service brake
Hydraulic
Engine
Energy consumption
6.30 kWh
Engine brand / model
GCT (ex-Nissan) / K25
Engine power according to ISO 1585
35 kW
Rated speed
2400 rpm
Number of cylinders / Capacity of cylinders
4 - 2488 cm³
Energy consumption according to VDI cycle (Gas)
6.30 kg CO2/h
Miscellaneous -
Working hydraulic pressure for attachments
160 bar
Oil flow rate for attachments
72 l/min
Measured/guaranteed mean noise level at the ear of the operator
< 80 dB
Sound level at the driver's ear according to DIN 12 053
80 dB