Packed With Power.
Robust For Fabrication Applications.
Packed with power, the Weldmatic 350 is robust and built to perform for professional
fabrication applications. Capable of MIG, TIG and Stick welding, it offers optimal weld
characteristics that provide high quality results.
Featuring Digital Volt and Amp meters, the 350 allows for easy and precise set up by
retaining last weld information. Perfect for a workshop it comes packaged with a separate
wire feeder for extra flexibility. Built for tough Australian conditions, and manufactured with 3
years warranty, the Weldmatic 350 offers reliability and performance that’s second to none.
SUITABLE APPLICATIONS
Medium to Heavy Fabrication
WELDABLE MATERIALS
Steel
Stainless Steel
Aluminium
PACKAGE INCLUDES
Interconnecting Leads (10m)
W67 4 Roll Drive Wirefeeder
Work Lead (10m)
Euro Gun Cable (3.6m) with Bernard Centerfire 0.9mm Tip
Gas Regulator
Drive Rollers – 0.9/1.2mm V Groove & 0.9/1.2mm Knurled
Industrial Twist Lock Electrode Holder (3m)
SPECIFICATIONS
Primary Voltage: 380/415 VAC - 50/60Hz
Rated Primary Current: 19.4 Amps
Max Primary Current: 25 Amps
Recommended Generator Power: 25 kVa
Supply Plug: 32 Amp
IP Rating: IP21S
Weight: 97kg
Warranty: 3 Years
Standards Compliance: AS60974.1 & AS1674.2 (VRD)
MIG SPECIFICATION
Output Range: 30A/15.5V-350A/31.5V
Rated Output 40°C (10min): 350A/31.5V 60%, 271A/27.6V 100%
Wire Size Range: 0.6/0.8/0.9/1.2mm
Material Thickness Range: Welds up to 12mm+ steel plate, single pass
STICK SPECIFICATION
Current Range: 25A/21V-350A/34V
Rated Output 40°C (10min): 350A/34V 60%, 271A/30.8V 100%
Electrode Size Range: -
Material Thickness Range: -
TIG SPECIFICATION
Current Range: 15A/10.6V-350A/24V
Rated Output 40°C (10min): 350A/24V 60%, 271A/20.8V 100%
Material Thickness Range: -
FEATURES
— 350 A three phase MIG, Stick & TIG welder
— 350 A at 31.5 V 60% Duty Cycle
— Digital Meters - Easy to read and easy to adjust parameters
— Built-In Thermal Protection – Prevents the machine from operating beyond its safe thermal zone
— Four geared wire drive - Provides a consistent, smooth, and strong drive for a variety of wires
— Burn Back – Controls how far the wire burns back to the tip on completion of the welding operation
— Creep Mode - Provides slow wire speed until weld starts - ideal for aluminum starts
— Spot Timer - Provides short weld times for repetitive spot welds
— Suitable wires - Gas-shielded and gasless flux-cored wires
— Spool capacity - Takes 5kg and 15kg spools
— VRD (Voltage Reduction Device)
— IP21S rated
— Generator compatible – 25 kVa