The Most Powerful WIA Package.
Best for Industrial Applications.
The Weldmatic 500 is a powerful and robust multi-process machine built to perform for
professional fabrication applications. Capable of MIG, TIG and Stick welding, it offers optimal
weld characteristics that provide high quality results.
Featuring Digital Volt and Amp meters, the 500 allows for easy and precise set up by retaining
last weld information. Perfect for a workshop it comes packaged with a separate wire feeder for extra flexibility. Built for tough Australian conditions, and manufactured with 3 years warranty, the Weldmatic 500 offers reliability and performance that’s second to none.
SUITABLE APPLICATIONS
Medium to Heavy Fabrication
WELDABLE MATERIALS
Steel
Stainless Steel
Aluminium
PACKAGE INCLUDES
Interconnecting Leads (10m)
W67 4 Roll Drive Heavy Duty Wirefeeder
Euro Gun Cable (3.6m) with Bernard Centerfire 0.9mm Tip
Gas Regulator
Drive Rollers – 0.9/1.2 & 1.2/1.6mm V Groove 0.9/1.2 & 1.2/1.6mm Knurled
Industrial Twist Lock Electrode Holder (3m)
Work Lead (10m) with Heavy Duty G Clamp
SPECIFICATIONS
Primary Voltage: 380/415 VAC - 50/60Hz
Rated Primary Current: 32.5 Amps
Max Primary Current: 40 Amps
Recommended Generator Power: 35 kVa
Supply Plug: 32 Amp
IP Rating: IP21S
Weight: 105kg
Warranty: 3 Years
Standards Compliance: AS60974.1 & AS1674.2 (VRD)
MIG SPECIFICATION
Output Range: 30A/15.5V-500A/39V
Rated Output 40°C (10min): 500A/39V 60%, 387A/33.4V 100%
Wire Size Range: 0.6/0.8/0.9/1.2mm
Material Thickness Range: Welds up to 12mm+ steel plate, single pass
STICK SPECIFICATION
Current Range: 25A/21V-500A/40V
Rated Output 40°C (10min): 500A/40V 60%, 387A/35.5V 100%
Electrode Size Range: -
Material Thickness Range: -
TIG SPECIFICATION
Current Range: 15A/10.6V-500A/30V
Rated Output 40°C (10min): 500A/30V 60%, 387A/25.5V 100%
Material Thickness Range: -
FEATURES
— 500 A three phase MIG, Stick & TIG welder
— 500 A at 40 V 60% Duty Cycle
— Digital Meters - Easy to read and easy to adjust parameters
— Built-In Thermal Protection – Prevents the machine from operating beyond its safe thermal zone
— Four geared wire drive - Provides a consistent, smooth, and strong drive for a variety of wires
— Spot Timer - Provides short weld times for repetitive spot welds
— Creep Mode - Provides slow wire speed until weld starts - ideal for aluminum starts
— Burn Back – Controls how far the wire burns back to the tip on completion of the welding operation
— Suitable wires - Gas-shielded and gasless flux-cored wires
— Spool capacity - Takes 5kg and 15kg spools
— VRD (Voltage Reduction Device)
— IP21S rated
— Generator compatible – 35 kVa