The Ultimate MIG Industrial Welding Solution.
The Weldmatic Fabricator is the most powerful WIA MIG welding machine
for medium and heavy industrial fabrication applications. Packaged with a
separate wire feeder it provides extra flexibility for a workshop set up and
enables custom set up to suit the job including arc start, wire speed, burn
back, spot time, creep mode, pre and post gas plus more!
Built with quality components for tough Australian conditions it comes
with 3 years warranty, offering professional welders reliability and
performance that’s second to none.
SUITABLE APPLICATIONS
Workshops
Medium to Heavy Fabrication
WELDABLE MATERIALS
Steel
Stainless Steel
Aluminium
PACKAGE INCLUDES
W Roll Drive Wirefeeder
Work Lead (10m)
Euro Gun Cable (3.6m) with Bernard Centerfire 0.9mm Tip
Gas Regulator
Drive Rollers: 0.9/1.2mm V Groove; 0.9/1.2mm knurled (Gasless, Flux Cored, Metal Cored)
Gas Regulator/Flowmeter
Interconnecting Leads (10m)
SPECIFICATIONS
Primary Voltage: 415 VAC-50Hz
Rated Primary Current: 18 Amps
Max Primary Current: 27 Amps
Recommended Generator Power: 20 kVa
Supply Plug: 32 Amp
IP Rating: IP21S
Weight: 101kg
Warranty: 3 Years
Standards Compliance: AS60974.1 & AS1674.2 (VRD)
MIG SPECIFICATION
Current Range: 50A/16.5V-400A/34V
Rated Output 40°C (10min): 400A/34V 45%, 350A/31.5V 60%, 270A/27.5 100%
Wire Size Range: 0.6-1.6mm (Solid), 0.8-2.0mm (Cored)
Material Thickness Range: Welds up to 12mm+ steel plate, single pass
FEATURES
— 400 A three phase MIG welder
— 400 A at 34 V 45% Duty Cycle
— Digital Meters – Easy to read and easy to adjust parameters
— Fan-on-Demand™ Cooling Fan – Reduces noise, energy use and contaminates
— Built-In Thermal Protection – Prevents the machine from operating beyond its safe thermal zone
— Arc Start - Modifies arc starting condition, wire accelerates at different speed depending on application
— Four geared wire drive - Provides a consistent, smooth, and strong drive for a variety of wires
— Burn Back – Controls how far the wire burns back to the tip on completion of the welding operation
— Spot Timer –Provides short weld times for repetitive spot welds
— Creep Mode – Provides slow wire speed until weld starts - ideal for aluminium starts
— Suitable wires - Gas-shielded and gasless flux-cored wires
— Spool capacity - Takes 5kg and 15kg spools
— IP21S rated
— Generator compatible – 20 kVa