New 3-5 ton (38mm or 40mm pin) LG 600mm Excavator GP Digging Bucket suit Airman, Hitachi etc

New 600mm Genuine LiuGong Excavator GP Digging Bucket suit 3-5 Ton machine.

This is a solid, sturdy, well engineered bucket made by the world renowned LiuGong who have been making industrial machinery since 1958.

Condition is New and is in perfect condition except for a few scratches and chipped paint.

It has Tapered sides so mud slides out easily, and there are 2 drainage holes at the rear to let water out if you are dredging a dam etc.

There is extra wear plating on the bottom of the sides and there are extra wear strips welded underneath for durability (see pic# 9).

It also has 2 rear Lifting Hook Eyes at the back (see pics# 4-8).


***** Current Headstock configuration:
*
* 38mm Pin Diameter
* 185mm Pin Center to Pin Center (CtoC)
* 135mm Between the inside Ear Bosses (which can be shaved back up to 165mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
*
* Should fit: JCB 802 1986 Model and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


*** As a 40mm Pin Configuration:
* (the 2mm pin diameter difference should be fine if you have a half hitch or full hydraulic hitch fitted)
*
* Should fit: Airman AX30 / AX32U / AX36U, Case CX 31 / CX 35 / CX 36, Hitachi EX30 / EX30U / EX33U / EX35 / EX40UR, Hitachi Zaxis 30U, IHI 35J / (Cheiftain) 35G/H/J / 35NX, Kobelco SK 30SR-2 / SK 32 / SK 35 / SK 35SR / SK 35SR-2, Kubota KX 91-3 / KX101-3 / KX121-3 / U35 / U35-3, New Holland EH 35 / LE 35, Pel Job EB 36 / EB406, Sumitomo SH 35, Takeuchi TB 35 / TB 36 / TB 135, Wacker Neuson 3003 / 3503 / 3703 / 28Z3 / 38z3, Yuchai YC 35SR.
*
* Maybe fit: Case CX 36B, Caterpillar 303.5 / 303CR-ISJ / 303CR-OSJ, Daewoo Solar 035, Kobelco SK 30SR-3 / SK 35SR-3, Kubota KH 14 / KH 15 / KH 90 / KH 91 / KH101 / KX 91 / KX 91-2 / KX101 / KX121-2, New Holland EC 35 / EH 30.B / EH 35.B, SMC MX35 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Dimensions: 612mm Wide (at the front cutting edge), 765mm Deep, 595mm High.
Weight: 104kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.